1
Unscrew 3 screws and take off the chain guard
casing.
2
Unzip the cover and disconnect the headlight
wire connector, bending the wire connector
latch.
3
Unscrew the screw which fixes the headlight
to the bracket, take off the headlight and pull
out the headlight wire.
4
Unscrew all the M6 screws which secures the
cover to the frame and take the cover off.
5
Unscrew 6 M8 screws, which mounts the
engine bracket to the frame and remove the
cover.
BALTMOTORS
www.snowdog.com
TRACKSLED REVERSE GEAR INSTALLATION INSTRUCTION
