background image

MODEL 870591

ITM. / ART. 870591

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,

OPERATION,

MAINTENANCE  AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND 
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON
PRODUCT, DO NOT RETURN THIS PRODUCT TO  THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 

1-888-278-8092

. BEFORE  YOU CALL, HAVE THE FOLLOWING INFORMATION 

AVAILABLE:

MODEL No.,

DATE PURCHASED AND STORE LOCATION.

AN ALLTRADE 

REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE.

SNAP-ON

®

IS A TRADEMARK LICENSED BY SNAP-ON

®

CORP.,

U.S.A., WHICH DOES NOT MANUFACTURE OR 

DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE

DIRECTED TO:

©COPYRIGHT 2012 ALLTRADE TOOLS, LLC.

1431 VIA PLATA

LONG BEACH, CA 90810-1462 USA

870591 – 2700 PSI Portable Pressure Washer_Rev 2012

FOR CUSTOMER SERVICE

PARA EL SERVICIO

PARA EL CONSUMIDOR

1-888-278-8092

Printed in China  

Impreso en China

2700 PSI PORTABLE
PRESSURE WASHER

INSTRUCTION MANUAL

Summary of Contents for 870591






















Reviews: