background image

COMPONENT 692024 

FOR CUSTOMER SERVICE

1-888-278-8092

Printed in China

3021528

Conforms to Std. UL 1776
Certified to CAN/CSA-C22.2
STD No.68-92

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,

OPERATION,

MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND 
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR SNAP-ON
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 

1

1--8

88

88

8--2

27

78

8--8

80

09

92

2

. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION 

AVAILABLE:

MODEL No.,

DATE PURCHASED AND STORE LOCATION.

AN ALLTRADE 

REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE.

SNAP-ON

IS A TRADEMARK LICENSED BY SNAP-ON

CORP.,

U.S.A., WHICH DOES NOT MANUFACTURE OR 
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:

©COPYRIGHT 2010 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA

870785 – 2000 PSI Electric Pressure Washer_Rev 06/01/11

2000 PSI ELECTRIC 
PRESSURE WASHER

INSTRUCTION MANUAL

For consumer questions or comments,
please call 1-888-278-8092.

Days/Hours of operation:
9am-7pm EST Monday - Friday
10am-6pm EST Saturday - Sunday

English and Spanish Speaking
Customer Service Representatives are
Available.

Summary of Contents for 692024
















Reviews: