Smeg SE2641NO Instructions For Installation And Use Manual Download

Page: 1 / 15

Contents

INSTRUCTIONS FOR PROPER USE _______________________________________ 4

SAFETY INSTRUCTIONS ________________________________________________ 5

KNOW YOUR HOB _____________________________________________________ 6

BEFORE FIRST USE____________________________________________________ 6

COOKING ZONES______________________________________________________ 7

DESCRIPTION OF CONTROL ON THE FRONT CONTROL PANEL_______________ 8

USE OF THE COOKING HOB_____________________________________________ 9

CLEANING AND MAINTENANCE _________________________________________ 13

SOMETHING WRONG? ________________________________________________ 13

10.

INSTALLATION _______________________________________________________ 14

INSTRUCTIONS FOR THE USER: these contain user advice, description of the commands and the

correct procedures for cleaning and maintenance of the appliance.

THE SYMBOLS SHOWN IN THIS MANUAL MAY DIFFER FROM THOSE ON THE PRODUCT.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the

qualified technician

who must

install the appliance, set it functioning and carry out an inspection test.

Summary of Contents for SE2641NO
















Search results

Summary of Contents for SE2641NO

Reviews:

Related manuals for SE2641NO

Brands by name

Popular brands

Smeg SE2641NO, Instructions For Installation And Use Manual

Search results

Summary of Contents for SE2641NO

Reviews:

Related manuals for SE2641NO

Brands by name

Popular brands