Thank you for choosing Smartpay
Getting Started Guide |
Smartpay PAX D210
The
D210
provides a smart, secure and mobile payment terminal. It connects to the internet via your Wi-Fi internet connection.
You terminal should be already connected, however if you are
replacing an existing terminal you’ll need to call us before you can
transact.
Call the Smartpay Technical Support Team on
0800 476 278
. We
will release the security keys and perform your initial login.
Now you’re all ready to take payments
Flip this card over
for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Get help online at:
smartpay.co.nz/help
View the full user guide for your terminal at:
smartpay.co.nz/guides
Call our Technical Helpdesk on
0800 476 278
Contact your bank to enable/disable card types, electronic
vouchers (offline mode) or contactless.
Contact Paymark to change your business name on your receipt.
Need help?
Integrated EFTPOS?
STEP THREE:
Connect to the Paymark network
STEP ONE:
Switch on
1. Turn on the terminal by holding the button on the side of
the terminal. The terminal will go through a start up sequence.
STEP TWO:
Connect to the Wi-Fi
Complete these simple steps to get your
terminal connected, ready to take a payment.
Terminal will attempt to connect to last Wi-Fi network. Make
sure the terminal is in range of your Wi-Fi network, you will be
prompted to connect/configure a network connection.
1. Press
CLEAR
to change your Wi-Fi network
2. Press
ENTER
to scan for network connections
3. Select the Wi-Fi network you wish to connect to
4. Enter the Wi-Fi password
If successful, the icon lights up in the top left corner of the screen.
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to the Integration Set Up Guide included with your
terminal.
To download the full user guide visit
smartpay.co.nz/guides
This contains instructions on care for your terminal, loading
paper and full functionality details.
What’s in the box
*
D210 Terminal
base unit
Pre-loaded
paper roll
Charging cable
Return courier
label
*If this is a replacement terminal you may need to use the cables from your existing terminal.
You can charge the terminal by plugging it into the mains power. It will take approx. 3 hours for a full charge. It can also be charged
using a car charger accessory or spare batteries are available depending on your needs.
You can purchase these through our online store
smartpay.co.nz/store
.
Charging the terminal
