![background image](http://html.mh-extra.com/html/slyk/pillow-stand/pillow-stand_instruction-manual_1294129001.webp)
Pillow Stand Instruction Manual
1 of 2
Introduction
Thank you for purchasing the SLYK® Pillow Stand. This is a unique, patent-pending product that will transform how you
use your smart devices hands-free.
By being attached firmly via the adjustable belt to household cushions or pillows, the Pillow Stand will enable use of your
devices anywhere around your home, whilst you are at your leisure. It has been designed and perfected to be practical,
easy to use and hold your devices securely. The pillow/cushion is not included, to allow you to use your own.
The Pillow Stand works best on a 45cm x 45cm cushion/pillow, that is firm enough not to deform when the strap is
tightened, so select one that is appropriately sized.
The SLYK® Pillow Stand has been designed to work best with Apple iPhones and iPads but can be used with any other
smartphone or tablet with a single centralised button.
Use Note 1: Some of our customers like to remove the belt and use the Pillow Stand as a desk or table stand. This works
perfectly but please note that if the belt is removed, it will not easily be repositioned and so this removal should be seen as
a permanent change to the product not a temporary repurposing.
Use Note 2: If your device has a thin case you can insert this most easily into the pillow stand by dropping the face of the
device towards you, placing the front of the base of the device on top of the Pillow Stand’s ‘jaws’ and then gently levering
the device into the jaws, by standing the device upward whilst gently pushing it down, until it is resting against the raised
back jaw and comfortably and securely held.
Assembly
The Pillow stand comes fully assembled and attaches easily to a suitable cushion/pillow, as illustrated below.
The Pillow Stand works best on a 45cm x 45cm cushion/pillow, that is firm enough not to
deform when the strap is tightened, so select one that is appropriately sized.
Undo the strap.
Place the strap around the selected cushion/pillow.
Secure with the hook and loop strap by gently pressing the two surfaces together.
Reverse the cushion/pillow and adjust to a central position.
Put your device securely in the stand.
Care of your product
The silicone cover on the Pillow Stand is a supple material so it needs to be handled with care. It can attract dust and
other small particles and should only be wiped clean with a soft damp cloth, free of cleaning products.