HD Foldable Pocket Drone
1. Top Cover
2. Blade
3. LED Light
4. Camera
5. Power Switch
6. Battery
IMPORTANT SAFETY INFORMATION
CAUTION:
AVOID FLYING DRONE IN CROWDED AREAS.
WARNING:
NOT SUITABLE FOR CHILDREN. ROTATING BLADES MAY CAUSE INJURY.
Important Instructions Before Use
Only use device for intended purposes.
Fly drone in area without low barriers or crowds of people.
Review rules and regulations for flying drones in your area.
Ensure all propellers are secure.
1.
2.
3.
4.
Click icon “
” to activate altitude hold.
5.
1. Main Menu
2. Capture Photo
3. Capture Video
4. View Photos/Videos
5. Speed
6. Altitude Hold
7. Gravity Sensor
8. Show/Hide Controls
9. More Settings
10. 3D Flips and Rolls
11. One-Key Takeoff
12. Left Joystick (Height/Turning)
13. Left/Right Rotation Fine-Tuning
14. Voice Control
15. Emergency Stop
16. A Key to Unlock
17. Left/Right Side Fly Fine-Tuning
18. Right Joystick (Strafing)
19. One Key Landing (Must Be on Ground)
20. Forward/Backward Fine-Tuning
21. Flip Camera View Vertically
22. Toggle 3D
23. Headless Mode
24. One-Key Calibration
25. Draw route
App Instructions
Download Drone App on Your Smart Device
Scan QR code for your Android or iOS device.
Android (Google Play): https://play.google.com/store/apps/details?id=com.lewei.jyufo&hl=en_US
iOS (App Store): https://itunes.apple.com/us/app/jy-ufo/id1146475731?mt=8
1.
Android
iOS
Before use, place the drone on the flat ground. Turn on your Wi-Fi and connect to WiFi-720P-###.
2.
Open the app and enter main interface, then click “play” to enter the main app.
3.
Click “
” to enable the controls.
4.
Pre-Flight Preparatlon
Propeller installation
Propellers should be installed by partnering with their corresponding
leg. Please see the diagram on the right for details. Failure to install
propellers correctly may impact drone performance. To install and
uninstall propellers, use the included screwdriver.
1.
Arm folding order
When storing, fold the front arms (near the camera) in first.
2.
Lithium battery instructions
Grip the battery from both sides and pull out the entire battery
assembly. To charge, plug the USB cable into a power source and
the red cable into the battery.
3.
