User Guide
GETTING STARTED WITH INDY
FIRST TIME PAIRING
Because true wireless audio is still pretty new, Indy may be your first experience with this
technology. But pairing Indy to your device for the first time is actually really simple. You just
have to follow three easy steps:
1.
Remove your Indy earbuds from the package
2.
Place them in the charging case, and make sure the LEDs turn red, then close the case.
3.
Now remove your earbuds from the case.
This process will automatically turn Indy on and put it into pairing mode. You can then select
Indy from your device’s list of Bluetooth devices.
TROUBLESHOOTING
When people have trouble with true wireless audio, it’s usually related to Bluetooth pairing. If
you can’t get Indy to pair to your phone or your earbuds are having trouble connecting to one
another, here’s how you reset Indy to resolve pairing issues.
1.
Place your Indy earbuds in the charging case.
2.
Remove Indy from your device’s paired list.
3.
Turn off Bluetooth mode on your device (mobile or computer)
4.
Power on only your right Indy earbud by removing it from the case. It will be in a non-
connected state at this point.
5.
Tap the center of the earbud 4x. This will automatically power off the earbud and reset
it. You will know this was successful when the light on the earbud turns red. If the light
does not turn red please repeat step 5 until the light turns red. Place the right earbud back
in the case.
6.
Now repeat those same steps only with the left earbud. (steps 4 and 5)
7.
Next, remove both earbuds from the case to have them automatically power on and begin
pairing to one another.
8.
You’ll hear one beep indicating the buds have paired together, and then a voice prompt
that will notify you that Indy is now “Pairing”, meaning it’s searching for your device.
9.
At this point, turn your device’s Bluetooth mode back on and re-pair to Indy.
