User Guide
Thank you for purchasing a SKOPE refrigeration product.
Installation Guidelines
When installing this chiller, ensure the installation guidelines below are considered and met
.
Ventilation Requirements
This chiller must have the following ventilation clearances at all times.
Ventilation
Ensure all ventilation
requirements below are
met.
Door Opening
Allow adequate space for
the door/s to open and
close properly.
Sunlight
Do not install the chiller in
direct sunlight.
Uneven Surface
Do not install the chiller on
an uneven surface.
Surface
The installation surface
must be capable of
supporting the loaded
cabinet.
Power Supply
Do not overload the power
supply.
Blocking Ventilation
Do not store boxes or items in
front or on top of the chiller.
Climate Class
The chiller must be installed
in an environment within its
climate class.
The climate class is stated
on the cabinet rating label
inside the chiller, and
specified on the back page
of this user guide.
TME and SKT models
BME and SKB models
No below clearance required
Min.
300mm
above
No side
clearance
required
No behind
clearance
required
Min.
50mm
above
Min.
50mm
below
No side
clearance
required
Min.
50mm
behind (provided
by rear spacer)
BME and SKB Rear Spacer
Extend the two rear spacers
out, ensuring they are
locked into place.
Refrigeration
Refrigeration
