Document NO.: RD-592-39-001
Smoke and Heat Alarm User Manual
Model number:GS592
Thank you for purchasing our smoke
detection. Please take a few minutes to read the user’s
manual thoroughly and familiarize yourself and your family
with its operation. And save it for future reference.
Diagram 1
Product Specifications:
Power:
built-in DC3V(CR123A)Lithium battery
(battery not replaceable).
Operation current
:
<6uA(Standby), <7
Alarm volume
: >85dB(A) at 3 meters.
Smoke sensitivity
:0.094-0.154dB/m.
Heat sensitivity
:
54-70
℃
.
Silence time:
a
pprox. 10 minutes.
Local smoke alarm sound pattern:
BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s
pause 1.5s, with the red LED flash
alarm pattern.
Local heat alarm sound pattern:
BI 0.3s - pause 0.1s, with the red
repeat this alarm pattern.
Comply with standard:
EN14604:2005/AC:2008
BS5446-2:2003.
Description:
The unit is a photoelectric 3V DC smoke and heat
photoelectric technology, it is more sensitive in detecting
slow smoldering fires which generate light smoke, little heat
and may smolder for hours before bursting into flames. This
smoke alarm does not contain any radioactive material.
Smoke alarms should be installed in every room (except the
EN14604:2005/AC:2008B
S 5446-2:2003
Version:
- 1 -
Alarm User Manual
Ref
：
ST592
alarm and heat
. Please take a few minutes to read the user’s
familiarize yourself and your family
with its operation. And save it for future reference.
Lithium battery
75mA(alarm).
pause 0.5s – BI 0.5s –
LED flashing, repeat this
the red LED flashing,
EN14604:2005/AC:2008
2:2003.
and heat alarm. The
photoelectric technology, it is more sensitive in detecting
slow smoldering fires which generate light smoke, little heat
and may smolder for hours before bursting into flames. This
not contain any radioactive material.
hould be installed in every room (except the
bathroom and kitchen),finished attics and basements, making
sure the people in the home will be able to hear and respond
to the alarm sound. For minimum protection, you should
install an alarm on every level of th
outside sleeping rooms. Each alarm should be placed in the
middle of the ceiling of each room to be protected.
single storey dwelling installation recommendations: Install a
smoke alarm on the ceiling inside each bedroom and in
hallway outside each separate sleeping area. If a bedroom
area. hallway is more than 30 feet long, install a smoke alarm
at each end. If there is a basement: install a smoke alarm on
the basement ceiling at the bottom of the stairwell
multi-storey dwelling installation recommendations:
minimum of one smoke alarm on each
home. Install a smoke alarm on the ceiling inside each
bedroom and in the hallway outside each separate sleeping
area. If a bedroom area hallway
install a smoke alarm at each end install a smoke alarm at the
top of a first – to- second floor stairwell.
Important Safety Information:
1.
The test button accurately tests smoke alarm functions. Do
not use any other test method.
ensure proper operation.
2.
Please check the alarm on reoccupation of the premises
after a vacation.
3.
If you're sure it isn't a really alarm, open windows or fan
the air around smoke alarm to
4.
User to install this product needs to comply with all local
and national electrical installation and building codes.
5.
This smoke alarm is designed to be used inside a single
family home only. In multifamily buildings, each
individual living unit should have its own smoke alarms.
Do not install in non-residential buildings as this smoke
alarm is not a substitute for a complete alarm system.
6.
Install a smoke alarm in every room and on every level of
the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fi
home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke
alarm in time to alert household members. A smoke alarm
will not promptly detect a fire except in the a
which it is installed.
7.
Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals to
a potential danger. However, there may be some
EN14604:2005/AC:2008B
2:2003
Version: G
finished attics and basements, making
sure the people in the home will be able to hear and respond
For minimum protection, you should
on every level of the home particularly
ach alarm should be placed in the
middle of the ceiling of each room to be protected. Typical
single storey dwelling installation recommendations: Install a
smoke alarm on the ceiling inside each bedroom and in the
hallway outside each separate sleeping area. If a bedroom
hallway is more than 30 feet long, install a smoke alarm
at each end. If there is a basement: install a smoke alarm on
the basement ceiling at the bottom of the stairwell. Typical
orey dwelling installation recommendations: Install a
minimum of one smoke alarm on each occupiable level of the
Install a smoke alarm on the ceiling inside each
bedroom and in the hallway outside each separate sleeping
area. If a bedroom area hallway is more than 30 feet long,
install a smoke alarm at each end install a smoke alarm at the
second floor stairwell.
Important Safety Information:
he test button accurately tests smoke alarm functions. Do
not use any other test method. Test smoke alarm weekly to
on reoccupation of the premises
t isn't a really alarm, open windows or fan
the air around smoke alarm to test and silence it.
product needs to comply with all local
and national electrical installation and building codes.
This smoke alarm is designed to be used inside a single
home only. In multifamily buildings, each
individual living unit should have its own smoke alarms.
residential buildings as this smoke
alarm is not a substitute for a complete alarm system.
Install a smoke alarm in every room and on every level of
the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the
home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke
alarm in time to alert household members. A smoke alarm
will not promptly detect a fire except in the area or room in
Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals to
a potential danger. However, there may be some
18
0905
