Sioux Tools 1 Series, Instructions-Parts List Manual

Page: 1 / 30

Form ZCE427A
1
Date
2017March15/H
Form ZCE427A
Date 2017March15/H
Page 1 of 20
INSTRUCTIONS & PARTS LIST FOR NO. 1 SERIES
“1ST” and “1OT” PUSH TO START TOOLS
SERIAL “C”
SAVE THESE INSTRUCTIONS!
Read and understand these instructions before operating this tool.
WARNING
When used improperly power tools can create hazardous situations.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Improperly used power tools can cause injury or death.
Original
Instructions
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
SCREWDRIVER SAFETY
Screwdrivers can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool’s information sheet for the noise level. Damping may help work surface from
ringing. Keep tool maintained to prevent an increase in noise. Replace the consumable/inserted tool to prevent an increase in
noise. Ensure that the muffler is still installed.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool’s information sheet for the vibration level.
Prolonged exposure to vibration can cause injury .
Worn, chipped, or cracked sockets, bits, and adapters can break.
Do not use worn, chipped, or cracked sockets, bits, or adapters. Inspect the screwdriver and inserted bit periodically for damage.
Do not use a damaged screwdriver or bit.
Broken sockets, bits and adapters can cause injury.
Screwdrivers present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool. Gloves can become entangled with the rotating drive, causing broken or severed fingers.
Rotating drive sockets an drive extensions can easily entangle rubber-coated or metal reinforced gloves. Do not wear loose
fitting, cut or frayed gloves. Never hold the drive, socket or drive extension. Keep hands away from the rotating drive.
Entanglements can cause injuries.
This tool is not insulated for contact with electric power sources
.
Do not use near live electric circuits. When driving screws into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Sudden and unexpected tool movement can occur when the fastener bottoms on the work.
Be sure your body position allows you to have control of the tool at all times. Make sure your footing is secure. Consult manufacturer
for proper reaction bar if movement is excessive.
When using a reaction bar:
• Be aware hands or feet can be injured if bar breaks.
• Keep hands from between bar and workpiece. Hands and fingers can be injured if caught between bar and work piece.
• Follow instructions supplied with reaction bar for proper installation and use.
Sudden and unexpected tool movement can cause injury.
Driving screws creates dust.
Do not breathe dust created when driving screws. Use approved mask. Dust and fumes generated by driving screws can cause
ill health. Consider dust created by tool and existing dust disturbed. Direct exhaust to minimize dust disturbance. Control dust
at the point of emission.
Breathing dust created when driving screws can cause injury.
Tools that are used with a suspension device can fall if they are not securely fastened to the device.
If the tool is used with a balancer or other suspension device, be sure the tool is firmly attached to the device.
Falling tools can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.