Registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by
®
.
www.simunition.com
Page 1 of 36
© 2019 GD-OTS Canada
8971965.FTSIM_rev12
FX
®
9003 Protective Mask
User Instruction Guide
This
User Instruction Guide
can be used
with FX
®
9003 Mask assembled
configurations;
FX
®
9003 Mask Assembly Black (part # 8971960)
FX
®
9003 Mask Assembly Tan (part # 8971962)
FX
®
9003 Mask Assembly Black (part # 8971998)
FX
®
9003 Mask Assembly Tan (part # 8971999)
The FX
®
9003 Mask Assembly can be assembled with the following lens models
and foam types;
FX
®
9003 Goggle Assembly, Single lens with Open Cell Foam (part # 8971970SP)
(Discontinued)
FX
®
9003 Goggle Assembly, Double lens with Open Cell Foam (part # 8972220SP)
(Discontinued)
FX
®
9003 Goggle Assembly, Single lens with Close Cell Foam (part # 8971021SP)
Note: See all configurations of FX
®
9003 Goggle Assembly description below.
FX
®
9003 Protective Mask
The
FX
®
9003 Protective Mask
can be equipped
with three (3) different lens models: Single and Double lens with Open
Cell Foam and Single lens with Close Cell Foam. Lens configurations and Foam type can easily be identified by specific
characteristics featured on the front of
the
FX
®
9003 Protective Mask.
Please refer to pictures below to
see every possible
lens configurations.
Open Cell Foam material characteristics
The Open Cell Foam material has a matte finish and micro bubble open cells are visible on the surface of foam
(see Fig. 21a and 24a). This type of foam can absorb a large quantity of liquid when immersed.
Close Cell Foam material characteristics
The Close Cell foam material has smooth and soft finish without any micro bubble cell visible on the surface (see Fig. 27a).
This type of foam is categorized as a self-skinning foam and provides comfort and durability. When immersed, the Close
Cell Foam material does not absorb or trap any liquid and/or bacteria
.
