1
SimpliFire • Scion Trinity Floating Mantel Instruction Manual • 2043-970 Rev. B • 9/20
Scion Trinity Floating Mantel
SF-SCT43-MANTEL, SF-SCT55-MANTEL
Model: SF-SCT43-BK, SF-SCT55-BK
- Instructions -
Leave this manual with party responsible for use
and operation.
NOTICE! DO NOT discard this manual.
Important service
and maintenance instructions included.
Tools and Supplies Needed
Before beginning the installation be sure that the following
tools and building supplies are available.
Tape measure
Needle-nose pliers
Hammer
Gloves
Level
Magnetic Phillips screwdriver
Safety glasses
Flat blade screwdriver
1/2 in. drill bit for 3/16 diameter toggle bolts (applicable if
installing on masonry walls)
Masonry drill bit 5/16 in. (applicable if installing on ma-
sonry walls)
Kit Components
• Mantel Bottom*
• Mantel Top*
• Mantel Side Panel (2)
• Side Bracket (2)
• Bottom Bracket (2)
• Front Bracket (1)
• ST4*12 Screws (6)
• ST4*8 Screw (4)
• ST6*50 Screw (8)
• M5*10 Screw (2)
• M6*16 Screws (8)
• 6*30 Wooden Dowels (8)
• 2-inch(51mm) cap. Top Mounting Trim
• Masonry Anchor (8)
• Wall Mount Bracket (1)
• Toggle Bolt Anchor (8)
* The Top and Bottom mantel pieces may be config-
ured in either top or bottom positions depending on
the desired look.
The Floating Mantel is paint-ready with a white primer
finish.
SIDE BRACKET (2)
BOTTOM BRACKET (2)
FRONT BRACKET (1)
Figure 1 Bracket
