Welcome
Thanks for purchasing BulletHD- ADVENTURE Wearable Sports Camcorder.
The world’s first wearable camcorder with 12.0 Mega Pixels camera! With our
customized mounts in box are ideally suited for mounting to yoke in motorbike,
airplanes, golf carts, vehicle, bicycles and many other round and square rail
applications, or any flat surface you can imagine! Aluminum Armored Body -
Even any tough situation and severe weather can’t stop your recording! It’s
also shock, vibration and water resistant.
What’s in the box?
●
Camcorder
●
Double Socket Arm
●
Zinc U-Bolt Mount
●
Battery
●
Rotating Flat Surface Mount
●
Hand Safety Strap
●
Adhesive Mount
×
2
●
Charger
●
Mount Adapter
●
USB Cable
●
Arm
●
User Manual
CAMERA OVERVIEW
INITIAL SET UP
1. Make sure the camera is OFF before adding or removing the memory card!
2. Screw out the rear cap (open) located at the back of the camera .
3. Install a Micro SD memory card (max up to 32GB) into the rear slot. To insert the micro SD card,
slide the micro SD card into the card slot on the back of the camera with the card label facing
down. The SD card will click into place once it is inserted past flush with the camera. Use your
fingernail to do this. Then screw in the rear cap till is complete lock.
4. If “no” SD Memory card is inserted into the camera, a Red/Green LED light on top of the c amera
will blink.
5. The Micro SD memory cards must be clean (no images from other sources). If you are using the
Micro SD memory card from other cameras, please make sure to format the SD memory card in your
