1
Serial ATA-to-Ultra ATA Adapter
Quick Installation Guide
04-0261C
Features and Benefits
• Allows you to connect an existing Ultra ATA 133/100/66 hard
disk drive to a Serial ATA controller of any brand and
supports data rates up to 133 MB/s
• Use this adapter with a SIIG Serial ATA controller to maximize
device support
• Compliant with Serial ATA specification, revision 1.0
• Works with any Serial ATA-enabled system
• Plugs into the 40-pin connector of an Ultra ATA hard disk drive.
No PCI slot is required.
System Requirements
• Serial ATA-enabled Pentium or equivalent PC with an available
Serial ATA port
• Windows 98/98SE/ME/NT 4.0/2000/XP
Package Contents
• (1) Serial ATA-to-Ultra ATA Adapter
• (1) Serial ATA cable
• (1) "Y" split power cable
• This quick installation guide
Anti-Static Precaution
Static Electricity Discharge may permanently damage your system. To
avoid possible static electricity discharge during the installation,
please follow the guidelines below:
• Discharge any static electricity build up in your body by
touching a large grounded metal surface or the computer’s case
(if plugged in), for a few seconds.
• During the installation, avoid any contact with internal parts.
Handle cards only by their external edges.
