background image

Add rinse-aid.

Add detergent.

Select programme.

Short and handy: everything
your dishwasher needs...

Before using for the first
time, read the Installation
and Operating Instruc-
tions!

Add salt.

Switch appliance ON

, off we go...

Press main switch, choose programme. 
Close door.

Signal sounds, open door. End-of-programme
indicator flashes, press main switch.

Switch appliance OFF

, everything OK...

Brief

 Instructions

: Dishwasher

9000

 049 133

 

 

  

 

 

 

en

Setting the water softening system *

Quickly sorted

Find out the water
hardness at your water
utility company and
enter below

* only before using the

dishwasher for the first
time
 or if the water hard-
ness changes

Read off the setting

Setting

dH

fH

Clarke mmol/l

and then select a setting

– Hold down programme button B and switch on the main

switch, then release the buttons. The    . display flashes and
buttons A and B illuminate (water hardness setting was set
to 2 at the factory).

– Each time button B is depressed, the setting increases by

one (0-3). If buttons AB and C illuminate, the maximum
water hardness setting has been reached. If the water
hardness setting is now increased again, the lights go out
and the water hardness setting is set to 0.

– Switch off the main switch. The selected setting has been

stored in the appliance.

0

1

2

3

Reset

A

B

C

22–35

0–6

7–16

17–21

0–1,1

1,2–2,9

3,0–3,7

3,8–6,2

9–20

0–11

12–29

30–37

38–60

0–8

21–26

27–44

Dissolves limescale (not required for set value 0!)

Unscrew
the lid.

Only before using
the dishwasher
for the first time
pour approx. 1 l /
2 pt water
 into the
salt opening.

Pour in max.
1.5 kg / 3 lb 5 oz
salt (never deter-
gent!)

Screw on the
lid. Switch on
dishwasher
immediately.

Everything is sparkling clean ...

Refill whenever level indicator is light!

Press mark 1,
lift up lid 2.

Pour in
rinse aid.

Close the
lid. CLICK!

Very dirty dishes, a lot of detergent ...

If required, open
the lid (press the
pin).

Warning,

combination 
products are not
suitable for all
programmes, 
follow manufac-
turer’s instructions.

Pour in
detergent.

Push the lid
shut, press.
PLOP!

Quick, economical or intensive ...

This overview indicates the max. possible number of
programmes. The programmes which correspond to your
appliance can be found on your appliance fascia.

The programme data are values measured in the
laboratory in compliance with Standard EN 50242.
Deviations is practice are possible.

Overview of programmes

105

1,50

20

140

0,95

12

29

0,60

12

13

0,12

5

 35

 50

 70

 65

Duration in minutes

Power consumption in kWh

Water consumption in litres

Intensive

Normal

Eco

Quick

Prerinse

102

1,30

20

Additional programmes **

Increased flexibility ...

** on some models

Upper basket cleaning

...Only the crockery in the
upper basket is cleaned

Reviews: