*1
CODE 080150-254
NWPS-254
Filter Holder for PM4 Personal Dust Sampler
Operation Manual
Before Use
△
This product is a PM4 filter holder with 2.5 L/min aspiration rate. Do not use it for any applications
not indicated in this manual.
△
This is precision manufactured product. Handle it very carefully. In particular, performance may
deteriorate significantly if the aspiration port is scratched or otherwise damaged.
△
This product is assembled from a large number of parts. Therefore, handle it with particular care.
△
[Modifications and Repairs Are Prohibited]
Never disassemble or modify this product, as doing
so will void the warranty with Sibata. Doing so may also result in an unforeseen fault or accident.
■
Overview
This product is a PM4 filter holder with 2.5 L/min aspiration rate. By installing a suction pump in this
product, at an aspiration rate of 2.5 L/min, dust can be collected with the property PM4 (for removing
50 % of 4
μ
m particles).
■
Specifications and Component Parts
Item Code
080150-254
Model NWPS-254
Aspiration Rate
2.5 L/min
Temperature Range
0 to 40
°
C
Particle Separation Classification
PM4 (for removing 50 % of 4
μ
m particles)
Filters
25 mm dia. metal collection plate (stainless steel) to capture
over 50 % of 4
μ
m particles and particles more than 4
μ
m
25 mm dia. PTFE binder filter
to capture remaining 4
μ
m
particles and particles less than 4
μ
m
Accessories
Grease guide,
Connector Tubing 7 mm I.D., 10 mm O.D., 1m
This product is configured with the following parts.
Fig. 1
Holder Assembly Sequence
①
Nozzle cover
②
Nozzle
③
Metal collection plate
④
Spacer
⑤
PTFE gasket
⑥
Metallic mesh, filter base, tube connector
⑦
O-ring
⑧
Holder base
*1
PTFE binder filter
(sold separately)
