background image

This device complies with Part 15 of the FCC Rules.  Operation is subject to the
following two conditions:  (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

WARNING    FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void the user's
authority to operate this equipment.

Note:  This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.  This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.  If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Note:

A shielded interface cable is required to ensure compliance with FCC
regulations for Class B certification.

FOR YOUR RECORDS....

For your assistance in reporting this product in case of loss or theft, please record
the model number and serial number (located on the bottom of the case) below.
Please retain this information.

Model Number

Serial Number

Date of Purchase

Place of Purchase

Summary of Contents for YO-470















































Reviews: