background image

 SPECIAL WARNING

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE THIS INSTALLATION MANUAL FOR LOCAL ELECTRICAL INSPECTOR’S USE.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

 CLEARANCES AND DIMENSIONS

For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated 

clearances and dimensions on pages 2 and 3. See Figure 1 (for 24") or Figures 3 and 4 (for 30") .

Microwave Drawer

INSTALLATION MANUAL

UNPACKING YOUR MICROWAVE DRAWER

•  

Remove  all  packing 

materials from inside 

the Microwave Drawer. 

DO NOT REMOVE 

THE  WAVEGUIDE 

COVER,  which  is 

located  on  the  top 

of  the  Microwave 

Drawer. 

•  

Remove  the  feature 

sticker, if there is one. 

Check the drawer for 

any damage, such as 

misaligned  or  bent 

drawer, damaged drawer seals and sealing surfaces, broken 

or loose Microwave Drawer guides and dents inside the cavity 

or on the front side of the drawer. If there is any damage, do 

not operate the Microwave Drawer and contact your dealer or 

a SHARP AUTHORIZED SERVICER.

IMPORTANT NOTES TO THE INSTALLER

  •  

Read all of the Installation Manual before installing the 

Microwave Drawer.

  •  

Remove all packing material before connecting the electrical 

supply.

  •  

Observe all governing codes and ordinances.

  •  

Be sure to leave these instructions with the consumer.

IMPORTANT NOTES TO THE CONSUMER

Keep  this  manual  with  your  Operation  Manual  for  future 

reference.
  •   As when using any microwave oven generating heat, there are 

certain safety precautions you should follow. These are listed 

in the Operation Manual. Read all and follow carefully.

  •   Be sure your Microwave Drawer is installed and grounded 

properly by a qualified installer or service technician.

  IMPORTANT SAFETY INSTRUCTIONS

 If the information in this manual is not followed 

exactly, a fire or electrical shock may result that could cause 

property damage, personal injury or death.

 To reduce the risk of tipping, the Microwave 

Drawer  must  be  secured  by  a  properly  installed  Anti-Tip 

block.
  •  This Microwave Drawer must be electrically grounded in 

accordance with local codes.

  •  Make sure the wall coverings and the cabinets around the 

Microwave Drawer can withstand the heat generated by the 

Microwave Drawer.

 

Never leave children alone or unattended in 

the area where a Microwave Drawer is in use.

 Never leave the 

drawer open when the microwave is unattended.

  Stepping,  leaning  or  sitting  on  the  drawer 

may result in serious injuries and can also cause damage to the 

Microwave Drawer.
  • 

Do not use the Microwave Drawer as a storage space.

 

This creates a potentially hazardous situation.

  •  Check that the time-of-day is in the display. If not, touch

 

Stop/Clear 

to prevent unintended use.

1

Waveguide 

cover

Sealing 

surface

Oven 

cavity

Sealing 

surface

Содержание Insight Pro KB-6015K

Страница 1: ...to leave these instructions with the consumer IMPORTANT NOTES TO THE CONSUMER Keep this manual with your Operation Manual for future reference As when using any microwave oven generating heat there are certain safety precautions you should follow These are listed in the Operation Manual Read all and follow carefully Be sure your Microwave Drawer is installed and grounded properly by a qualified ins...

Страница 2: ...Microwave Drawer will be installed for proper electrical supply Your oven can be built into a cabinet or wall by itself or under a gas or electric wall oven Be sure that the clearance of the floor between the wall oven and the microwave drawer is a minimum of 2 inches The microwave interior will easily accommodate a 9 x 13 oblong dish or a bag of microwave popcorn 24 MICROWAVE DRAWER MEASUREMENTS 3...

Страница 3: ... s location 30 MICROWAVE DRAWER MEASUREMENTS NORMAL INSTALLATION STEPS ANTI TIP BLOCK INSTALLATION INSTRUCTIONS To reduce the risk of tipping of the drawer the Anti Tip block must be properly installed located 14 3 4 inches above the floor on which the Microwave Drawer will sit The 6 inch Anti Tip block must be provided by the installer See Figures 1 and 6 for 24 or Figures 3 4 and 6 for 30 The Ant...

Страница 4: ...Please call or write if you have inquiries about your microwave product and or need to order parts Figure 8A ELECTRICAL OUTLET 4 5 Electrical outlet location Anti Tip block 6 The electrical requirements are a 120 volt 60 Hz AC only 15 amp or more protected electrical supply It is recommended that a separate circuit serving only this appliance be provided The drawer is equipped with a 3 prong groun...

Отзывы: