background image

OPERATION MANUAL

FOR YOUR RECORDS    

For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.    
Please  retain  this  information.       

Model number ______________________________
Serial number_______________________________
Date of purchase ____________________________
Place of purchase ___________________________

MODEL

HT-DD5000

SM

<P=001>

HOME THEATER SYSTEM

Thank you for purchasing this SHARP product. 
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.

Note:

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING

FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.

Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trade-
marks of Dolby Laboratories. Confidential Unpublished
Works. 

1992-1997 Dolby Laboratories, Inc. All rights re-

served.

HT-DD5000(SEC) TINSE0009SJZZ

Summary of Contents for HT-DD5000





























Reviews: