background image

ENGLISH

GX-BT9

OPERATION MANUAL

MODEL

PORTABLE BLUETOOTH BOOMBOX

14M R KI 

1

TINSEA485AWZZ

Barcodesoft

http://www.barcodesoft.com

 Barcode Symbology: 

 Code 93

 ;     Font Facename: 

 Code93MHr

 Data To Encode: 

 TINSEA485AWZZ

 Point Size 8 :    

 *TINSEA485AWZZTR*|

 Point Size 10 :    

 *TINSEA485AWZZTR*|

 Point Size 12 :    

 *TINSEA485AWZZTR*|

 Point Size 14 :    

 *TINSEA485AWZZTR*|

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this 

manual carefully. It will guide you in operating your SHARP product.

Accessories

Printed in Malaysia

The following accessories are included.

AC power cord x 1

(QACCD0025AWZZ)

Remote control x 1

(RRMCGA370AWSA)

Carrying Strap x 1 

(JHNDZA001AWZZ)

Notes for Android device

 

This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher.

 

For device with a lower Android version, refer the operation manual of the device for recommended app 

(application).

iPhone, iPod, iPod nano and iPod touch are 

trademarks of Apple Inc., registered in the U.S.

and other countries.

Lightning is a trademark of Apple Inc.

PORTABLE MUSIC BOOMBOX GX-BT9

REMOTE 

SENSOR

Summary of Contents for GX-BT9























Reviews: