background image

This document has been published to be used for

after sales service only.

The contents are subject to change without notice.

Parts marked with “

“ are important for maintaining the safety of the set. 

Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

LASER PRINTER OPTIONS

AUTO DUPLEX MODULE

AR-DU3

AR-DU4

MODEL

AR-TE3

CODE : 00ZARDU3//A1E

[1]

PRODUCT OUTLINE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

[2]

CONFIGURATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

[3]

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

[4]

UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 4 - 1

[5]

EXTERNAL VIEWS AND INTERNAL STRUCTURES  . . . . . . . 5 - 1

[6]

MACHINE OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

[7]

ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

[8]

DISASSEMBLY AND ASSEMBLY, MAINTENANCE . . . . . . . . . 8 - 1

[9]

BLOCK DIAGRAM, WIRING DIAGRAM . . . . . . . . . . . . . . . . . . 9 - 1

CONTENTS

AR-DU4

AR-DU3

AR-DU3

AR-DU4

AR-TE3

      

Summary of Contents for AR-DU3


























Reviews: