Sharp AH-AP18FMF Operation Manual Download

Page: 1 / 20

AH-AP18FMF

INDOOR UNIT

SPLIT TYPE
ROOM AIR CONDITIONER

OPERATION MANUAL

AU-A18FF

* Plasmacluster is a trademark of SHARP

Corpration.

OUTDOOR UNIT

Thank you for purchasing a SHARP air
conditioner. Please read this manual care-
fully before operating the product.

• SPECIFICATIONS ....................................... 2

• IMPORTANT SAFETY INSTRUCTIONS ..... 3

• ADDITIONAL NOTES ON OPERATION ..... 5

• TIPS ON SAVING ENERGY ........................ 5

• PART NAMES .............................................. 6

• USING THE REMOTE CONTROL .............. 8

• BASIC OPERATION .................................... 10

• ADJUSTING THE AIR FLOW DIRECTION ..... 11

• PLASMACLUSTER OPERATION ............... 12

• TURBO COOLING OPERATION ................. 13

• ONE-HOUR OFF TIMER ............................. 13

• TIMER OPERATION .................................... 14

• AUXILIARY MODE ...................................... 16

• MAINTENANCE ........................................... 16

• BEFORE CALLING FOR SERVICE ............ 18

CONTENTS

R22

Summary of Contents for AH-AP18FMF





















Search results

Summary of Contents for AH-AP18FMF

Reviews:

Related manuals for AH-AP18FMF

Brands by name

Popular brands

Sharp AH-AP18FMF, Operation Manual

Search results

Summary of Contents for AH-AP18FMF

Reviews:

Related manuals for AH-AP18FMF

Brands by name

Popular brands