Thank You for choosing The Sensorcon Carbon Monoxide Inspector! We want to be your go to company for all your
professional needs! Please feel free to contact us with any comments, questions or concerns and we’ll do our best to
make sure you’re 100% satisfied.
CONTACT INFORMATION:
150 N. Airport Drive Bu
ff
alo, NY 14225
O
ffi
ce:
(716) 566-2728
Fax:
(716) 276-3047
www.sensorcon.com
CUSTOMER SERVICE HOURS OF OPERATION:
Monday through Friday: 8am to 4pm
Please Note: East Coast Time Zone
Front View
Side View
Rear View
PORTABLE CARBON MONOXIDE DETECTOR PRODUCT MANUAL
150 Airport Drive Buffalo, NY 14225 Office: (716) 566-2728 Fax: (716) 276-3047 [email protected] www.sensorcon.com
WARRANTY:
The Inspector has a
one year warranty
on all of its parts. It is recommended that you calibrate the Inspector every six
months. If you do not calibrate it then there is a good chance it will not provide an accurate measurement. If a calibration
is never performed an
EOL
(End of Life) icon will display on the LCD after two years of use. A successful calibration
postpones an
EOL
for
180
days.
NORMAL OPERATING CONDITIONS:
Temperature: -20oC to +50oC (-4 F to +122 F)
Humidity: 20-90% R.H (0-99% intermittent)
PRACTICAL CONSIDERATIONS:
Short term measurements
(i.e. <1hr)
in any humidity
(0-99% R.H.)
are fine as long as condensation does not block the
sensor inlet. A longer term exposure to extreme humidity outside the normal range can cause damage to the sensor.
Damage occurs much faster at higher temperatures. The LCD display and sensor will not work properly at lower
temperatures.
NOTE: Higher temperatures can damage the device.
PLEASE NOTE:
Do you know if there is Carbon Monoxide in the air? The Carbon Monoxide Inspector is a professional grade tool that will
answer that question. Carbon Monoxide is a toxic and odorless gas that is produced from most combustion processes.
This includes furnaces, car exhaust and burning cigarettes.
Page 1
