![background image](http://html.mh-extra.com/html/selectric/pir360-flu/pir360-flu_instruction-manual_1236858001.webp)
Instruction Manual for IP20 rated PIR 360° Detector 1200W
for use on Industrial & Domestic Lighting Systems
Selectric Energy Savers Code: PIR360-FLU Infrared Motion Sensor
Introducing the Selectric Energy Savers Range Item PIR360-FLU infrared PIR
motion detector.
The product adopts an excellent sensitivity detector and integrated circuit for ease of wiring.
The device is saving-energy with a 360° detection radius. The product utilizes the infrared
energy from a person or animal when in the range radius of the unit’s detection field. It can
identify day and night automatically, is easy to install and used in a wide variety of applications.
PRODUCT SPECIFICATION:
Power Source: 220-240V/AC
Detection Range: 360
°
Power Frequency: 50Hz
Detection Distance: 12m max(<24°)
Ambient Light: 3-2000LUX (adjustable)
Working Temperature: -20° +40
℃
Time Delay: Min.10sec
±
3sec
Detection Motion Speed: 0.6-1.5m/s
Max.15min
±
2min
Power Consumption: Approx 0.5W Max
Rated Load: Max.1200W Incandescent
Power Consumption: Approx 0.1W Min
300W LED
Detection Speed: 0.6-1.5m/s
Installation Height: 1.8-2.5m
IP20 rated suitable for use in the
Installation cutout diameter 63 – 64mm
Garage or indoors
FUNCTIONALITY:
Ø
The sensor can identify day and night: The user can adjust the working state in
different ambient light. It can work in the daytime and at night when it is adjusted on
the “sun” position (max). It can work in the ambient light less than 3LUX when it is
adjusted to the “3” position (min). As for the adjustment pattern, please refer to
TESTING THE UNIT below.
Ø
Time-Delay is added continually: When a person or object moves continuously within
the radius the light timer resets.
CONNECTION:
Ø
Remove the transparent vinyl cover which covers the sensor’s connection terminals.
Ø
Loosen the screws in the connection terminals and using the correct cable, connect
the wires accordingly (see figure 1).
Ø
Clamp the cable down using the cord grip provided with two screws.
Ø
Install back the transparent vinyl cover into the original position.
Ø
Fold the metal spring of the sensor upwards, until they are in “I” position with sensor,
and then put the sensor into the hole or installation box which has been cut out or
installed prior to wiring.
Ø
Releasing the spring, the sensor will be set in this installation position.
Ø
After the sensor has been securely fitted, turn on the power and then test the unit.