85-6384
1
Studio Panel LED Luminaires
MANUAL ADDENDUM
MANUAL ADDENDUM - PLEASE READ
1. Overview
This MANUAL ADDENDUM provides information in addition to the Installation and User’s Manual supplied with
the unit. Please review this document - as well as the supplied manual - carefully before using the Studio Panel LED
Luminaire.
Some notes about this document:
• Your Studio Panel LED Luminaire has been updated with the latest firmware (version 1.2 or later).
• Please refer to the new menu categories and options table and custom recording options below.
• Table 1 in this addendum supersedes Table 5 on page 13 of the installation and user's manual.
2. Updated Menu Categories and Options
Note:
All options in grey shading are added in software version 1.2 (or later). All other options remain unchanged.
Table 1: Menu Categories and Options (Software Version 1.2 and later)
Category
Options
Next Level
Meaning
Mode
Manual
(Manual
mode, local
control only
(no DMX)
Setting
Factory
Dimmer
Rotate wheel to set
dimmer level from 0 to
100% (in 1% increments)
CCT
Rotate wheel to set CCT
level from 3000K to 6000K
(in 1K increments)
Custom
Preset
(01 - 09)
Allows users to set and
adjust Presets, Dimmer,
and WW / CW (CCT) to
their specific requirements.
Dimmer
(0 - 100%)
WW
(Warm White) 0-
100%
CW
(Cool
White) 0-100%
DMX-8B
(Unit is set to
operate in
DMX512 8-
Bit mode)
Address
Sets the units DMX512
address (from 001 to 512)
LastHold
Sets the units operation
should DMX512 signal be
disconnected or lost -
YES
(maintain last DMX512
state) or
NO
(do not
maintain last DMX512
state)
State
Information only - displays
if DMX512 is present
(connected) or not
DMX-16B
(Unit is set to
operate in
DMX512 16-
Bit mode)
Address
Sets the units DMX512
address (from 001 to 512)
LastHold
Sets the units operation
should DMX512 signal be
disconnected or lost -
YES
(maintain last DMX512
state) or
NO
(do not
maintain last DMX512
state)
State
Information only - displays
if DMX512 is present
(connected) or not
