EN
GL
IS
H
<<OPERATION --
VD 50 B>>
DISPLAY AND CROWN/BUTTON OPERATION
ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the Stopwatch 1/10 second, second and minute hands are at the "0"(12 o'clock) position.
If the stopwatch is in use, press the button in the following order to reset it, and then, check if the hands return to "0" position.
(For details, see "HOW TO USE THE STOPWATCH")
If the stopwatch is counting:
(A)
(B)
If the stopwatch is stopped:
(B)
* If either of the stopwatch hands are not at the "0" position, reset them following the procedure below:
3. Push the crown back to the
normal position.
Minute hand
Stopwatch 1/10 Second hand
(Move in 1/10 second increments)
Button (A) *In stopwatch function Start/Stop
Stopwatch second hand
(Move in second increments)
Crown at normal position
Second hand
Button (B) *In stopwatch function Split/Split release/Reset
* The
measured
time is indicated by the stopwatch hands that move independently of the center hands.
* Stopwatch 1/10 second hand moves for the first minute. After one minute, it indicates the measured time when it is stopped.
1. Pull out the crown to the
second click.
TIME SETTING
* Before setting the time, check that the chronograph measurement is stopped.
Crown
A
B
Hour hand
Stopwatch minute hand
(Move in minute increments)
VD50-P.1
Second click *Time setting
First click *Date setting
Crown
Stopwatch 1/10 second hand
Stopwatch
minute hand
Stopwatch second hand
2. Press button (A) or (B) to reset the stopwatch 1/10 second,
second and minute hands to "0" position.
* By pressing button (A), set the stopwatch
1/10 second hand.
* By pressing button (B), set the stopwatch
second hand and minute hands.
* The stopwatch minute hand moves correspondingly with
the stopwatch second hand.
* The hands move quickly if the respective buttons are
kept pressed.
2. Turn the crown
clockwise until the
previous day's date
appears.
4. Push the crown back in to the
normal position in accordance
with a time signal.
3. Pull out the crown to the second click when
the second hand is at the 12 o'clock position.
It will stop on the spot and advance the
hour and minute hands by turning the
crown
* When the crown is at the second click
position. Do not press any button.
Otherwise, the chronograph hands will
move.
1. Pull out the crown to the
first click.
* Do not set the date between 9:00 P.M. and 1:00 A.M.
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first change the time to any time
outside it, set the date and then reset the correct time.
