AIR NEEDLE SCALER COMPOSITE PISTOL TYPE
Model no:
SA660
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAfETY
WARNING!
ensure health & safety, local authority, and general workshop practice regulations are adhered to when using this
equipment.
WARNING!
disconnect from air supply before changing accessories or servicing.
Maintain the needle scaler in good condition and replace any damaged or worn parts.
Use genuine parts only. Unauthorised parts may
be dangerous and will invalidate the warranty.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
9
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are
secure.
9
Only use needles which are specifically designed for use with a needle scaler.
9
Wear approved safety eye/face shield, ear defenders, and hand protection.
9
Maintain correct balance and footing. ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the working area.
8
DO NOT
use the needle scaler for a task it is not designed to perform.
WARNING!
DO NOT
use needle scaler if damaged or thought to be faulty. (Contact Sealey service agent).
8
DO NOT
use needle scaler unless you have been instructed in its use by a qualified person.
8
DO NOT
carry the needle scaler by the air hose, or yank the hose from the air supply.
8
DO NOT
operate needle scaler if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT
carry needle scaler with your hand on the power trigger in order to avoid unintentional starting.
8
DO NOT
direct air from the air hose at yourself or others.
9
When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODuCTION
Suitable for cleaning heavy paint and rust scale from metal surfaces. Composite housing protects user from chill and helps to reduce
vibration. Soft-grip handle and in-line handle provide added comfort and control. Spare needle sets are readily available.
3. SPECIfICATION
Stroke: ......................................................................... 38mm
Free Speed: ............................................................ 4500bpm
Air Consumption:.......................................................... 12cfm
operating Pressure: ...................................................... 90psi
Air Inlet Size: .............................................................1/4”BSP
Weight: .......................................................................... 1.7kg
noise Power: ..........................................................107.1dB.A
noise Pressure: .......................................................97.1dB.A
Vibration: .................................................................... 6.3m/s²
Uncertainty: .............................................................. 3.15m/s²
4. PREPARATION
fig.1
SA660 Issue 3 (HF) 13/06/18
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear safety
footwear
