background image

tROLLEY JACK 1.5tONNE LOW ENtRY

ALUMINIUM ROCKEt LIFt

mODEL NO: 

RJA1550.V2

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFEtY

 

 

9

   Ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use  

  genuine parts only. The use of non-genuine parts may be dangerous and will invalidate the warranty.

 

9

   Locate the jack in a suitable, well lit working area.

 

9

   Keep working area clean and tidy and free from unrelated materials. Use jack on level and solid ground,  

 

  preferably concrete. Avoid tarmacadam as jack may sink in.

 

9

   Chock wheels of vehicle.

 

9

   Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PARK” if  

 

  automatic).

 

9

   Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc. to allow for  

 

  vehicle tilting.

 

9

   Ensure all non-essential persons keep a safe distance whilst the jack is in use. 

 

9

   Ensure there are no passengers in the vehicle.

 

9

   Place jack under only those lifting points recommended by vehicle manufacturer (see vehicle handbook).

 

9

   Check that the lifting point is stable and centred on the jack saddle.

 

9

   Ensure the jack wheels are free to move and that there are no obstructions.

 

  

DANGER: 

Use the jack for lifting only, 

NOt 

for supporting the lifted load.

 

9

   Ensure there are no persons or obstructions beneath the vehicle before lowering.

 

9

   Use suitable axle stands under the vehicle before proceeding with any task.

 

9

   Use a qualified person to lubricate and maintain the jack.

 

9

   Ensure that only hydraulic jack oil is used in the jack.

 

8

  

DO NOt 

operate the jack if damaged.

 

8

  

DO NOt

 allow untrained persons to operate the jack.

 

8

  

DO NOt

 operate the jack when tired or under the influence of drugs, alcohol or intoxicating medication.

 

8

  

DO NOt 

exceed the rated capacity of the jack.

 

8

  

DO NOt

 allow the vehicle to move during lifting or lowering, or use the jack to move the vehicle.

 

8

  

DO NOt

 jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.

 

8

  

DO NOt

 work under the vehicle until appropriately rated axle stands have been correctly positioned. 

 

8

  

DO NOt 

use the jack for purposes other than that for which it is intended.

 

8

  

DO NOt

 top up hydraulic system with brake fluid. Use hydraulic jack oil only. (Sealey Part No: HJO500mLS or    

 HJO5LS)

 

8

  

DO NOt

 adjust the safety overload valve.

 

9

   When not in use store jack, fully lowered, in a safe, dry, childproof area. 

2.  INtRODUCtION

 made primarily for the motor racing enthusiast, this jack weighs in at just 12.75kg. Utilises many weight-saving techniques such as a skeletal lift 

arm. Features Rocket Lift by use of twin pistons, bringing saddle up to jacking point with minimal pumps. Polyurethane wheels for smooth and 

quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, 

lightweight pick-up.

3.  SpECIFICAtION 

model no ............................................................ RJA1550.V2

Capacity ................................................................... 1.5tonne

Length ........................................................................ 485mm

max. chassis height .................................................... 125mm

max. saddle height ..................................................... 370mm

min. saddle height ........................................................ 88mm

Nett. weight ................................................................. 13.5kg

Refer to 

instruction

manual

Wear safety 

footwear

Original Language Version

© Jack Sealey Limited

RJA1550.V2 | Issue:3 (1,F) 22/01/19

Apply 

Chock

Wheels

Never

exceed

X2

Reviews: