Sealey POWER TOOLS SA6, Instructions

Page: 1 / 2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3 Follow all workshop safety rules, regulations, and conditions when using wrench.
p WARNING! Disconnect from air supply before changing accessories or servicing.
3 Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
p WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3 Only use impact sockets which are specifically designed for use with an impact wrench.
3 Wear approved safety eye/face shield, ear defenders, and hand protection.
p WARNING! Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3 Keep children and non essential persons away from the working area.
7 DO NOT use the wrench for a task it is not designed to perform.
p
p
WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
7 DO NOT use wrench unless you have been instructed in its use by a qualified person.
7 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7 DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7 DO NOT direct air from the air hose at yourself or others.
3 When not in use disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR
3/4” Sq DRIVE SUPER DUTY AIR
IMPACT WRENCH
Model:
SA6
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
2. INTRODUCTION & SPECIFICATIONS
Drive size . . . . . . . . . . . . . . . . . . . . . . . . . .3/4”
Working/Max torque . . . . . . . . . . .980/1150lb.ft
Ultimate torque . . . . . . . . . . . . . . . . . . 1175lb.ft
Air consumption . . . . . . . . . . . . . . . . . . .12cfm
Operating pressure . . . . . . . . . . . . . . . . .90psi
Air inlet size . . . . . . . . . . . . . . . . . . . . .1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2kg
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96dB
Vibration . . . . . . . . . . . . . . . . . . . . . .4.38mtr/s
2
Super quality Impact Wrench with rocking-dog
clutch and hardened anvil assembly. Features
4-position adjustable air/torque control and
reversible action plus spring balance anchorage
point.
Issue No: 1
Date Issued: 260404
Item Part No Description
24 SA6/27 INLET BUSHING
25 SA6/28 ADJUST VALVE
26 SA6/30 O-RING
27 SA6/32 SPRING
28 SA6/33 STEEL BALL 4.0mm
29 SA6/34 SPRING
30 SA6/36 FRONT END PLATE
31 SA6/37 ROTOR
32 SA6/38 VANE
33 SA6/39 CYLINDER
34 SA6/40 SPRING PIN
35 SA6/41 SPRING PIN
36 SA6/42 REAR END PLATE
37 SA6/44 MOTOR CASE PACKING
38 SA6/45 MOTOR CASE COVER
39 SA6/46 NOTCH PIN BUSHING
40 SA6/47 NOTCH SPRING
41 SA6/48 NOTCH PIN
42 SA6/49 WASHER
43 SA6/50 BOLT
44 SA6/8-10 ANVIL ASS’Y (STD 6”)
SA6 - 1 - 260404
Item Part No Description
1 B/6202Z 6202Z BEARING
2 SA6/01 COVER SEAL
3 SA6/05 SPRING WASHER
4 SA6/06 HEX CAP BOLT(M6 20)
5 SA6/07 THRUST WASHER (SO)
6 SA6/09 O-RING
7 SA6/1-4 CASE
8 SA6/11 HAMMER FRAME
9 SA6/12 DRIVER
10 SA6/13 HAMMER
11 SA6/14 HAMMER PIN
12 SA6/15 SPACER
13 SA6/16 MOTOR CASE
14 SA6/17 HELI COIL INSERT
16 SA6/19 REVERSE VALVE
17 SA6/20 PIN
18 SA6/21 TRIGGER
19 SA6/22 THROTTLE BUSHING
20 SA6/23 THROTTLE PIN
21 SA6/24 VALVE BALL
22 SA6/25 CONICAL SPRING
23 SA6/26 O-RING
Parts List For: SA6
01284 757500
01284 703534
E-mail: sales@sealey.co.uk
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Web address: www.sealey.co.uk