![background image](http://html1.mh-extra.com/html/sealey/power-tools-generation-series/power-tools-generation-series_instructions_1226536001.webp)
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered
to when using this equipment.
WARNING!
Disconnect from air supply before changing accessories or servicing.
WARNING!
Ensure that correct air pressure is maintained and not exceeded. Recommended pressure is 90psi.
WARNING!
Always wear approved eye or face and hand protection when operating the polisher.
Maintain the
polisher in good condition (use an authorised service agent).
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will
invalidate the warranty.
Use in a suitable, clean and tidy work area, free from unrelated
materials. Ensure that there is adequate lighting.
Before each use check pad for condition. If worn or damaged replace
immediately.
Use face, dust, or respiratory protection in accordance with COSHH
regulations.
Noise level may exceed 94dBA
- wear safety ear defenders.
Remove ill fitting clothing. Remove ties, watches, rings, other loose
jewellery and contain and/or tie back long hair.
Wear appropriate protective clothing and keep hands and body clear
of pad.
Maintain correct balance and footing. Ensure that the floor is not
slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the work area.
Ensure workpiece is secure before operating the polisher. Never hold a workpiece by hand.
Avoid unintentional starting.
Keep air hose away from heat, oil and sharp edges.
Check air hose for wear before each use and ensure that all connections are secure.
Prolonged exposure to vibration from this polisher poses a health risk. It is the owner’s responsibility to
correctly assess the potential hazard and issueguidelines for safe periods of use and offer suitable protective
equipment.
When not in use, disconnect from the air supply and store in a safe, dry, childproof location.
DO NOT
use an attachment which has a speed rating less than the speed rating of the polisher.
DO NOT
use the polisher for a task it is not designed to perform.
DO NOT
operate polisher if any parts are damaged or missing as this may cause failure and/or personal injury.
DO NOT
carry the polisher by the hose, or yank the hose from the air supply.
DO NOT
force, or apply heavy pressure to the polisher, let the polisher do the work.
DO NOT
place attachments close to your face and do not point at other persons or animals.
DO NOT
operate polisher when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT
carry the polisher with your finger on the trigger.
DO NOT
direct air from the air hose at yourself or others.
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
INSTRUCTIONS FOR :
GENERATION SERIES
MINI AIR POLISHER (75mm)
MODEL No:
GSA722
Original Language Version
GSA722 Issue:1 - 22/08/11