background image

INSTRUCTIONS FOR:

  

CREE LED ALUMINIUM TORCH 10W 

RECHARGEABLE LITHIUM-ION WITH 

ADJUSTABLE FOCUS

Model No

: LED034

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you 

years of trouble free performance.

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. 

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE 

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

1.1.   GENERAL.

 

Ensure the torch is correctly charged before initial use.

 

DO NOT

 turn the torch on when it is being charged.

 

DO NOT

 shine directly into your, other person’s or animal’s eyes.

 

DO NOT 

allow children to use the torch.

 

DO NOT

 use the torch if you suspect that the battery or the torch casing is damaged.

 

DO NOT

 immerse the torch in water.

 

When not in use store the torch a safe, dry, childproof location.

1.2.  ELECTRICAL SAFETY.

 

 

USE ONLY THE SUPPLIED MAINS CHARGER PLUG FOR CONNECTING TO THE MAINS POWER SUPPLY. 

 

WARNING!

 It is the user’s responsibility to read, understand and comply with the following electrical instructions: 

 

You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. An RCCB (Residual Current Circuit  

 

Breaker) should be incorporated in the main distribution board. We also recommend that an RCD (Residual Current Device) is used with  

 

all electrical products, particularly portable equipment which is plugged into an electrical supply not protected by an RCCB. 

 

You must

 also read and understand the following instructions concerning electrical safety. 

1.2.1.  

The Electricity At Work Act 1989

 requires all portable electrical appliances, if used on business premises, to be tested by a qualified  

 

electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.2.2

.  The Health & Safety at Work Act 1974 

makes owners of electrical appliances responsible for the safe condition of the appliance

 

and the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician. 

1.2.3.

  You must ensure that you:

 

Inspect the charger plug, cable and connector for wear and damage to ensure items are safe before connecting to the mains power    

 

supply.  If worn or damaged 

DO NOT

 use.

 

Check cables are always protected against short circuit and overload.

 

IMPORTANT:

 Check that the voltage marked on the charger plug is the same as the power supply to be used.

 

DO NOT

 pull the charger plug from the mains socket by the lead.

 

DO NOT

 use any other type of charger with this product. 

 

DO NOT

 try to take the charger plug apart.

 

DO NOT

 use the charger plug to charge or power any other electrical item.

 

DO NOT

 get the charger wet, or use in wet, damp conditions (for indoor use only).

 

WARNING!

 

NEVER

 substitute a standard 13 Amp 3 pin plug, or any other type of plug, for the charger plug.

Original Language Version

LED034     Issue: 1 - 11/04/13

2.  INTRODUCTION & SPECIFICATION

Single 10W CREE LED produces extremely bright, white light with an output of over 350 lumens, and gives a working range up to 500 metres.

Illumination type can be changed from spotlight to wide area by simple push/pull action of the head. Features lightweight Aluminium housing. Five 

function on/off push-button for full, half, low, flashing and SOS light. Powered by a 3.7V 2.0Ah Li-ion rechargeable battery. Supplied with 3 pin 

mains charger/adaptor.

Fig.1

© Jack Sealey Limited

Model No: 

 

LED034

Cell Type:  

 

3.7V 2.0Ah Ll-ion Rechargeable

Lumen Output: 

 

350lm

LED: 

  10W 

CREE

Charging Time: 

 

4 hours

Operating Time: 

 

2 hours

Multi function switch

Linear beam adjustment

Reviews: