INTERCHANGEABLE 3-IN-ONE COB LED
RECHARGEABLE INSPECTION LAMP
MODEL NO:
LED0131R
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1.
ELECTRICAL SAFETY
9
Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or
damaged
DO NOT
use.
9
Ensure the lamp is fully charged before initial use.
8
DO NOT
charge in damp conditions.
8
DO NOT
turn the lamp on when it is being charged.
8
DO NOT
shine directly into your, another person’s or an animal’s eyes.
8
DO NOT
allow children to use the lamp.
8
DO NOT
handle or move the lamp whilst it is being charged.
8
DO NOT
use the lamp if you suspect that the battery or the lamp casing is damaged.
8
DO NOT
leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
recharge the battery at least once every six months of non-use.
8
DO NOT
attempt to open, disassemble, modify or service the battery pack.
8
DO NOT
crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT
expose to temperatures above 60°C (140°).
9
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
IMPORTANT WARRANTY INFORMATION
The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish.
Under these circumstances we will not replace the battery regardless of whether the battery is less than one year old.
2. INTRODUCTION
Innovative 3-in-1 work light. Threaded interface enables user to change between 1000 lumen torch with sliding focus, 450 lumen work light and
a 300 lumen flexi-head. Features a power indicator on the switch and a magnet on the base for hands-free operation. Supplied in a presentation
box with a high quality USB cable.
3. SPECIFICATION
Model No ..............................................................LED0131R
Battery ......................................... 3.7V 2200mAh Lithium-ion
LED Type. ...................................................
2 x LED 1 x SMD
Charging Time ................................................................. 7hrs
Lumen Output
COB: 450lm, Flexi-headlight:300lm Torch:1000lm
Operating Time ......
(High):Flexi-headlight: 11hrs COB:4.2hrs
....................................................................
Flashlight: 3.3hrs
IP Rating ....................................................................... IPX4
4. OPERATION
4.1.
CHARGING
4.1.1.
Insert USB cable into mains plug and plug into mains supply.
4.1.2.
Remove USB socket cover on side of main body of torch.
4.1.3.
Connect the USB lead to the port on the side of the main body and a USB power socket. Turn on the power supply.
4.1.4.
Switch off power supply, remove charging lead and replace socket cover.
4.2.
OPERATION
4.2.1.
TORCH
4.2.1.1. Attach torch head by screwing onto main body.
4.2.1.2. To turn on press the on/off button, once for brightest, again for low light and once more to turn off.
Refer to
instructions
LED0131R Issue 1 17/02/21
Original Language Version
© Jack Sealey Limited
