![background image](http://html.mh-extra.com/html/sealey/cx410ss/cx410ss_instructions_1227095001.webp)
© Jack Sealey Limited
Original Language Version
INSTRUCTIONS FOR:
WORKSHOP TROLLEY STAINLESS
STEEL 3-LEVEL
MODEL NO:
CX410SS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Refer to
Instruction
manual
1. SAFETY
1.1. GENERAL SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
9
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
8
DO NOT
overload the trolley - maximum weight per level is 30kg.
8
Use the trolley in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
8
DO NOT
use the trolley
for any purpose other than that for which it is designed.
8
DO NOT
stand on the trolley, use it as a ladder or allow others to ride on the trolley.
9
Use the wheel locks to prevent the trolley from inadvertently moving.
8
DO NOT
leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8
DO NOT
use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8
DO NOT
use trolley if any part is significantly damaged, paying particular attention to the wheels.
9
Keep children and unauthorised persons away from the work area.
2. INTRODUCTION
Grade 304 stainless steel workshop trolley with three 30kg capacity shelves. Shelves have 30mm walls around the sides and back with an
opening at the front - ideal for quickly getting to tools or fixings without obstruction. Fitted with a side handle and four castor wheels for ease of
mobility around the workplace. Supplied flat packed.
3. SPECIFICATION
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CX410SS
Overall Size (W x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 x 458 x 862mm
Shelf Size (W x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 x 450 x 30mm
Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30kg/level*
*Evenly distributed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CX410SS Issue 1 - 11/05/16