hydraulic commercial vehicle bush tool
mODEL NO:
cv040
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFety
WarNiNG!
Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
9
maintain the tool components in good and clean condition for best and safest performance.
9
Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
9
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
9
Wear suitable clothing to avoid snagging.
do Not
wear
jewellery and tie back long hair.
9
Keep children and other unauthorised persons away from the
working area.
9
Ensure there is adequate lighting prior to using the tool.
8
do Not
use the kit if any parts are missing or damaged.
8
do Not
use tool for any purpose other than that for which it is
designed.
imPortaNt:
These instructions are intended as a guide only.
Always refer to the vehicle manufacturer’s service instructions or
a proprietary manual to establish the current procedure.
2. iNtroductioN
Designed for the installation and removal of slotted bushes on HGV spring
suspension. Includes a 12tonne hydraulic cylinder (supplied without
hydraulic pump). Use in conjunction with Hydraulic Pump model No’s;
RE83/840/CWH (Air/Hydraulic) or RE97.10-01 (Hydraulic). Installation
protects the bush using the parallel working tension elements. Suitable for
use on the vehicle. Safe and easy to use.
3. coNteNts/aPPlicatioNs
Refer to
instruction
manual
Wear eye
protection
Original Language Version
© Jack Sealey Limited
Part Number description
application
CV040.02
Bush dia. 105mm (marked No. 3)
mAN (410/414/460) Renault (430/450/460)
CV040.03
Bush dia. 105mm (marked No. 4)
Volvo Fm12
CV040.04
Bush dia. 66mm (marked No. 5) stored under 12
mAN (410/414/460)
CV040.05
Bush dia. 59mm (marked No. 6)
Renault (430/450/460)
CV040.06
Bush dia. 49mm (marked No. 7)
Volvo Fm12
CV040.07
Bush dia. 78mm (marked No. 12)
Volvo Fm12
CV040.08
Bush dia. 78mm (marked No. 13)
Renault (430/450/460)
CV040.09
Bush dia. 98mm (marked No. 14)
mAN (410/414/460)
CV040.10
Clamping Ring dia. 68mm (marked No. 9)
mAN (410/414/460)
CV040.11
Clamping Ring dia. 60mm (marked No. 10)
Renault (430/450/460)
CV040.12
Clamping Ring dia. 51mm (marked No. 11)
Volvo Fm12
CV040.13
Installation Pad dia. 108mm (marked No. 15)
Volvo Fm12
CV040.14
Installation Pad dia. 103mm (marked No. 16)
Renault (430/450/460)
CV040.15
Installation Pad dia. 108mm (marked No. 17)
mAN (410/414/460)
CV040.16
Threaded Stud ‘Short’ m16x2.0
CV040.17
Threaded Stud ‘Long’ m16x2.0
CV040.18
Clamp Sleeve Set
CV040.19
Hydraulic Ram
CV040 | Issue:1 20/11/19
