![background image](http://html.mh-extra.com/html/sealey/cp20vng/cp20vng_quick-start-manual_1225678001.webp)
20V 18G CORDLESS STAPLE/NAIL GUN -
BODY ONLY
MODEL NO:
CP20VNG
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! DO NOT rest your finger on the trigger when picking up the tool, moving between operating areas and positions or
walking, as resting finger on trigger can lead to inadvertent operation. For tools with selective actuation, always check the
tool before use to ascertain the correct mode is selected.
WARNING! This tool has either selective actuation for contact actuation or continuous contact actuation by actuation mode
selectors or is a contact actuation or continuous actuation contact tool and has been marked with the symbol above (*). Its
intended uses are for production applications such as pallets, furniture, manufactured housing, upholstery and sheathing.
If using this tool in selective actuation mode, always ensure it is in the correct actuation setting.
8
DO NOT use this tool in contact actuation mode for applications such as closing boxes or crates and fitting transportation
safety systems on trailers and lorries.
9
Be careful when changing from one driving location to another.
WARNING! DO NOT
use the nail gun if damaged, has missing parts or is thought to be faulty.
DO NOT
use the tool if the trigger does
not turn the tool on and off. The tool must be repaired. Contact your Service Agent.
WARNING!
Remove the battery pack when a fastener jams in the tool, making any adjustments, or storing the tool.
WARNING!
Never engage in horseplay with the tool.
DO NOT
point the tool towards yourself or anyone nearby.
WARNING!
Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces
metal filings or wood chips.
WARNING!
Store idle power tools out of reach of children and
DO NOT
allow persons unfamiliar with the tool or the instructions to operate
the tool.
WARNING!
Always assume that the tool contains fasteners.
9
Dress properly.
DO NOT
wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts.
9
Use the tool in accordance with these instructions taking into account the working conditions and the work to be performed.
WARNING!
Keep hands, face, feet and all parts of the body away from the firing head at all times.
8
DO NOT
use the nail gun for a task it is not designed to perform.
DO NOT
force the tool.
8
DO NOT point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the fastener causing an injury.
8
DO NOT
actuate the tool unless it is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener
may be deflected away from your target.
8
DO NOT
operate the nail gun near flammable substances or flammable containers.
8
DO NOT
use the nail gun unless you have been instructed in its use by a qualified person.
8
DO NOT
operate the nail gun if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT
carry the nail gun with your hand on the power trigger in order to avoid unintentional firing.
8
DO NOT
load bent or damaged staples into the magazine.
8
DO NOT
overreach. Keep proper footing and balance at all times. Ensure the floor is not slippery and wear non-slip shoes.
8
DO NOT
drive staples into thin boards or near the corners of the workpiece.
▲
DANGER!
When putting the nail gun down, ensure that the trigger safety slide is not fouled, risking accidental firing.
9
Avoid unintentional firing. Keep fingers away from the trigger when not driving staples.
WARNING! Disconnect the battery
especially when loading staples, when carrying the tool, handing the tool to another person,
leaving the work area, making adjustments to the tool, clearing a jam or whenever it is left unattended.
WARNING!
Use caution when clearing a jammed fastener. The mechanism may be under compression and the fastener may be
forcibly discharged while attempting to free jammed condition.
9
Check the safety mechanism before use. Never use the stapler unless the safety is operating properly, otherwise the stapler could
drive a staple unexpectedly.
9
Place the tool properly on the workpiece.
DO NOT
drive staples one on top of another or with the tool at too steep an angle. The
staples could ricochet.
9
Keep the work area clean and well lit.
9
Maintain the nail gun in good condition and replace any damaged or worn parts. Check for misalignment or binding of moving
parts and any other condition that mat affect the tool’s operation, have the tool repaired before use. Use genuine
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Have the tool serviced by a qualified repair person using only identical replacement parts.
9
Follow all workshop safety rules, regulations, and conditions when using the nail gun.
9
Keep children and non essential persons away from the working area.
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Keep People
Away
Keep away from
rain
Original Language Version
© Jack Sealey Limited
*
CP20VNG Issue 2 (2,3) 24/05/21