instructions for
industrial workstation 4 drawers
model no:
aP990
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
1.1.
General safety
warninG!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using workbenches
and associated workbench drawers.
warninG!
use the workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into
the surface.
9
locate the workstation in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the workstation clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
take care when assembling of sharp edges
8
do not
remove a fully loaded drawer.
8
do not
use the workstation
drawer for any purpose other than that for which it is designed.
8
do not
use the workstation out of doors.
8
do not
get the workstation drawers wet or use in damp or wet locations or areas where there is condensation.
8
do not
clean the workstation drawers with any solvents which may damage the painted surfaces.
note:
the assembly of this product to the will require assistance.
2. introduction
industrial four drawer workstation, ideal for site workers or line managers and supervisors. lockable ball bearing slide drawers allow for
paperwork, books, stationary, valuables or even tools to be stored safely and securely. Large flat work surface provides plenty of room to
carry out day to day tasks. four large and four small pigeon holes can be used for paperwork, stationary or as in and out trays, keeping the
essentials on hand and in order. lower shelf allows for items such as workwear to be stored and on hand. supplied with two keys. some
assembly required.
3. sPecification
model no. .................................................................... AP990
overall size (W x d x H) .......................990 x 735 x 1430mm
large drawer (x1) ...................................485 x 500 x 140mm
large drawer (x1) ...................................330 x 500 x 140mm
X-large drawer (x2) ................................330 x 500 x 310mm
Pigeon Hole small(x3) ................................70 x 220 x 90mm
Pigeon Hole large(x3) ..............................300 x 220 x 90mm
shelf (W x d) .....................................................585 x 380mm
4. asseMbly
AP990 | issue 2 23/03/17
Original Language Version
© Jack sealey limited
refer to
instructions
Wear protective
gloves
Wear safety
footwear
fig.1
