background image

Page 1 of 36

P/N 595289-01 Rev B  5/15

OPERATION AND MAINTENANCE INSTRUCTIONS

SEMS

 

II 

SCOTT ELECTRONIC MANAGEMENT SYSTEM

USER PERSONAL DISTRESS ALARM AND USER ACCOUNTABILITY SYSTEM 

FOR THE SCOTT AIR-PAK X3 SELF-CONTAINED BREATHING APPARATUS

SEMS II CONSOLE ON AIR-PAK X3 SCBA

WARNING

THE SCOTT SEMS II PERSONAL DISTRESS ALARM AND USER ACCOUNTABILITY SYSTEM IS INTENDED 

FOR USE WITH SCOTT SELF-CONTAINED BREATHING APPARATUS (SCBA) WHICH MAY SUPPORT HUMAN 

LIFE IN HAZARDOUS ATMOSPHERES. FAILURE TO CAREFULLY READ AND UNDERSTAND THE FOLLOWING 

INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH TO THE SCBA USER.
USE OF A RESPIRATOR INTEGRATED WITH THE SEMS II / BLUETOOTH USER ACCOUNTABILITY SYSTEM WILL 

REQUIRE MODIFICATION OF THE RESPIRATOR "REGULAR OPERATIONAL INSPECTION PROCEDURES" AND 

WILL REQUIRE TRAINING OF THE RESPIRATOR USER IN THE USE OF SUCH RESPIRATORS.
THE FOLLOWING INSTRUCTIONS SUPPLEMENT BUT DO NOT REPLACE THE OPERATING AND MAINTENANCE 

INSTRUCTIONS SUPPLIED WITH EACH RESPIRATOR.

© 2015 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, SEMS II, PAK-ALERT, PAK-TRACKER, AIR-

PAK, and NxG are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.

DRAFT COPY - NOT FOR PUBLICATION 

IMPERIUM ACCOUNTABILITY 

BASE STATION (SHOWN  

WITH REQUIRED PERSONAL  

COMPUTER, NOT INCLUDED)

WARNING

THIS PRODUCT IS DESIGNED AND INTENDED TO FUNCTION PROPERLY IN REASONABLE/ORDINARY FIREFIGHT-

ING CONDITIONS. IT HAS BEEN CERTIFIED TO THE STANDARDS CONTAINED IN THE 2013 EDITION OF NFPA 

1982. LIKE ALL EQUIPMENT, THE FUNCTIONALITY OF THIS PRODUCT MAY BE COMPROMISED BY EXTREME 

FIRE CONDITIONS.

PRELIMINARY DRAFT - NOT FOR PUBLICATION 

Summary of Contents for SEMS II





































Reviews: