Scotchman FI-8510-20M, Manual

Page: 1 / 100

You have downloaded a manual for our
Model FI-8510-20M Ironworker.
This manual does not include all of the
optional tooling for this machine.
If you would like a tooling manual,
please download our #40 Tooling Manual.
4295
4758
10mm ss
10mm ss
10mm ss
10mm ss 10mm ss 10mm ss
10mm ss
10mm ss
12mm
12mm
15273
025182
25180
25083
6 mm ss
25070
25070
10mm 10mm
10mm
10mm
12mm
12mm
12mm
15381
25083
201610 201610
25078
113017 113017
15377
WARNING
SAFETY GLASSES REQUIRED WHEN
OPERATING OR OBSERVING THIS MACHINE
NEVER-
NEVER-
NEVER-
NEVER-
NEVER-
NEVER-
NEVER-
TO PREVENT SERIOUS BODILY INJURY
Operate, install tooling, service or adjust machine without
operator's manual and safety film.
Service machine with electrical power connected.
Operate any station without the respective strippers or
Operate machine with protective guards removed.
Place any part of your body under blade, punch or moving
Operate punch station without checking the punch to die
alignment and tightness.
Punch half holes, punch or shear unknown materials, side load
DO NOT REMOVE THIS SIGN FROM THIS MACHINE
REV. 0310 FOR MORE INFORMATION CONTACT SCOTCHMAN INDUSTRIES INC. 1-800-843-8844 003100
proper instructions and without reading and understanding the
hold-downs in place.
members.
(Check alignment and tightness daily.)
press brakes.
AT
SERIAL
SCOTCHMAN INDUSTRIES, INC.
PHILIP, SOUTH DAKOTA, U.S.A.
MADE IN U.S.A.
MODEL
FLA HZ
PH
H.P. VOLT
BLADE LENGTH PH. 605-859-2542
PSI
8510-20M
MACHINE CAPACITIES
SPEC. BASED ON MILD STEEL-65,000 PSI TENSILE
PUNCH
THROAT DEPTH RECT. NOTCHER
85 TONS
Ø27 THRU 25MM
Ø1-1/16 THRU 1"
10" - 254MM
76X127X12MM
3"w X 5"d X 1/2"t
#015380 1,05
FLAT SHEAR
25X300 - 19X508MM
1X12 - 3/4X 20"
BLADE LENGTH 20" - 508MM
PUNCH STROKE
3.45" - 87MM
ANGLE SHEAR
150X150X12MM
6"X6"X 1/2"
ROD SHEAR
Ø1-1/2" ROUND Ø38MM
1-1/4 SQUARE 32 SQUARE
FULLY INTEGRATED
BEYOND THESE GUARDS
INJURY DO NOT PLACE FINGERS
TO PREVENT SERIOUS BODILY
003105
WARNING
1210
GUARD FACE TO SHEAR EDGE
ADD 5-5/8" (143MM)
GUARD FACE TO SHEAR EDGE
ADD 4-1/4" (108MM)
11893Raw 11898 Assy.
230 Volts
19121
OFF
EATON 11856
ELECTRICAL HAZARD
Turn off power
and lock out
before servicing.
DANGER
3122 1213
15788
STOP START
START
SHEAR PUNCH
JOG
JOG PROBE
15600 Assy.
RUN