REMOVING LENS
1.Fold each end of temples inwards and press down as shown
to disconnect locking mechanism
2. Take out lens
INSERTING LENS
1.Fold each end of temples inwards and press down on locking
mechanism to disconnect from frame.
2.Align lens into frame
3.Extend temple to lock lens into position.
4. Repeat steps for opposite side
REMOVING GASKET
1. Pull out gasket frame from one side
2. Repeat step 1 on opposite side
3. Pull out middle section
INSERTING GASKET
2. Press down on one side until frames click into
position
3. Repeat step 2 on opposite side
INSERTING RX
ADAPTOR
1. Remove gasket
from frame
2. Align Rx adaptor
connecting pin with
frame and click into
position
position
as shown to disconnect
locking mechanism
REFIT TEMPLE OR ELASTIC
STRAP
elastic strap into frame until
locked into position
LENS SWAP
RX ADAPTOR FITTING
REMOVING TEMPLE
GASKET FITTING ON GENISYS PLUS
1
1
2
2
3
3
genisys
plus
Product
instructions
scopeoptics.com.au
REMOVING RX ADAPTOR
!"
