Installation
Checking the pressure readings:
1. Place a handpiece coupling onto an air pressure gauge, if available.
2. Place the gauge onto the dental unit tubing.
3. Shut off the water and place your foot onto the rheostat.
4. Adjust the drive air, chip air & water on the unit, as necessary, to reach the recom-
mended pressure readings.
Pressure readings for the STAT
IS
SL & ML:
•
Drive air = 2.1-4.2 bar (30-60 p.s.i.)
•
Recommendation = 2.8 bar (40 p.s.i.)
•
Return air < 0.5 bar (7 p.s.i.)
•
Water = 0.8-2.5 bar (11-36 p.s.i.)
•
Spray air = 1.0-4.0 bar (14-57 p.s.i.)
○
The minimum amount of water required for spray cooling is
50 mL per min. An insufficient amount of water may cause
overheating of the tooth.
Checking the STAT
IS
SL & ML coupling:
All 5 O-rings must be in place and should not be damaged. Missing or damaged O-rings
should be replaced, or they may result in premature failure or negatively affect handpiece
performance.
Important notes for burs & diamonds:
Diamond and carbide use: Only use burs that have shafts compliant with IS0 1797-1
type 3, made from steel or tungsten carbide and that meet the following criteria:
•
Shaft diameter from 1.59 -1.60 mm.
•
Overall length up to max. 25 mm.
•
Shaft clamping length of at least 11 mm.
•
Cutting edge diameter up to max. 2 mm.
•
Short shank burs can be used with the STAT
IS
SL 101.1 model.
STAT
IS
®
Handpieces
- Quick Reference Guide
SciCan GmbH
Wangener Strasse 78
88299 Leutkirch GERMANY
Tel.: +49 (0)7561 98343 - 0
Fax: +49 (0)7561 98343 - 699
Manufactured by:
STAT
IS
ML
S10000
STAT
IS
SL
S10001
SD-469 CA EN FR R1.
STAT
IS
is a registered trademark and
Your Infection Control Specialist
is a trademark of SciCan Ltd.
Please consult Operator’s Manual before using the devise(s).
6 pin, MULTIflex style
coupling with LED bulb,
anti retraction valve.
Connex LED
S10010
6 pin, coupling with
light connection, anti
retraction valve.
Connex L
S10002
5 hole, coupling with
fiber optic glass rod,
anti retraction valve.
Connex GR
S11002
Did you select the right coupler for your tubing?
