background image

MT-RT1802

Massage Bathtub

Instructions of Installation and Use

1. During the transportation or installation, do not pull the pipe or hold 

 to avoid 

    the water leakage. 

,

2. After long time use, if there are some dirt on product s surface, wipe it off gently by a 
    soft towel stained with mild detergent; for the metal parts, polish it with some car wax by 
    a towel, which brings out a refreshing appearance.  
3. Scale deposit can be wiped off with warm citric acid or vinegar by a soft cloth.

,

4. Don t clean the tub and 

 with hard or coarse material to avoid any scratches.

,

5. Don t clean the tub and 

 with gasoline to avoid any damages.

6. It is not recommended to leave water in the tub for a long time or use this tub for 
    washing purpose. Pls drain off the water after the bath and dissconnect the power supply.
7. There should be sufficient power supply and wires should be safely grounded.
8. For your safty, a professional technician is necessary to ensure earthing wire be well 
    grounded and a RCCB fitted during installation.

accessories

accessories
accessories

Cleaning & Maintaining

Preparations

Dortmund/Hannover

www.schonberg bathrooms.com

www.schonberg bathrooms.com

Summary of Contents for MT-RT1802







Reviews: