Schacht WOLF PUP 8.10 STROLLER Assembly Instructions Download

Page: 1 / 4

WOLF PUP 8.10

STROLLER

ssembly

nstructIons

Find out more at

schachtspindle.com

Schacht Spindle Company 6101 Ben Place Boulder, CO 80301

p. 303.442.3212 f. 303.447.9273

11.18

open—ready to weave

folded—ready to travel

FL3052

for

installation

olf

8.10

looms

Without

height

extender

All other Wolf looms without height extender require the Wolf Stroller (FL3051);

all Wolf looms with height extender require the Wolf Height Extender Stroller

(FL3053). If you received this booklet with FL3051 or FL3053, please visit our

website for the correct booklet.

Summary of Contents for WOLF PUP 8.10 STROLLER

Page 1: ...pany Inc 11 18 open ready to weave folded ready to travel FL3052 for installation on Wolf Pup 8 10 looms without height extender All other Wolf looms without height extender require the Wolf Stroller...

Page 2: ...rface Open the loom to weaving position see front cover illustration Set the treadle support on a block of wood or a few books to elevate the loom front about two inches 2 Identify the right outside c...

Page 3: ...w 3 8 washer Insert the new 3 8 x 3 1 2 hex bolt through a 3 8 washer then through the brake lever then through three 3 8 washers Figure 3 Now insert the hex bolt through the top hole F in the caster...

Page 4: ...ling Fold the loom making sure that the treadles come to rest above the rear leg brace Tighten the fold knobs and secure the slide lock bars to keep the loom closed The loom now sits on its stroller w...