Over-Arm Dust Collection
Installation Guide
For SawStop Contractor saws
with a Standard Fence Assembly
BEGIN HERE
3 mm hex key
4 mm hex key
Tools:
For all SawStop cabinet saws
and for Contractor saws with
T-Glide Fence Systems
2”
1.
Slide clamps D onto tube C.
22”
C
D
D
(For a Contractor saw with a
Standard Fence Assembly.)
Continue on the back side
Install brackets A by replacing the bolts on
the rear rail of the contractor saw with bolts
B in the locations shown above. Reinstall
the lock washer and nut on the end of each
bolt. Continue with steps 1-6 below.
Tools:
Two 13 mm wrenches
L-brackets
bolts
A
B
C
D
(For all saws
except
Contractor saws
with Standard Fence Assemblies.)
A
B
lower dust tube
upper dust tube
splitter
short hose
long hose
clamps with
screws
C
D
E
F
G
H
D
BEGIN HERE
2”
SawStop
rear rail
WARNING:
This product can expose you to chemicals including wood dust, which is known to the State of California to
cause cancer. This exposure can come from drilling, sawing, sanding or machining wood products. For more information
go to www.P65Warnings.ca.gov/wood.
Model: TSA-ODC
