Savant SHC-S2-00, Quick Reference Manual

Page: 1 / 2

SHC-S2-00 | 009-1775-00 | 181204
Copyright 2018 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
1 of 2
Rear Panel
A
Reset (hole)
To clear all Ethernet settings and revert them
back to their factory defaults, press and hold the
reset button for five seconds until the LED blinks
red rapidly; then release.
B
Power Input
5V DC 3A - Connect included wall wart power
supply between the 5V DC connection
and a 115-240V AC surge protected
outlet.
C
Status LED
Off - Disconnected from power supply.
Amber - Host is booting/rebooting and is
disconnected from the network.
1s 1s 1s
Repeat
1s Amber Flashing - Host is in
provisioning mode and ready to be added to a
network. Host is not assigned an IP Address.
Green - Connected to the local network and
is assigned an IP Address.
D
Digital Au-
dio Output
TOSLink (Optical) digital audio output. Connect
to digital optical audio input on switcher for
using the Audio Interrupt Service (AIS).
E
Ethernet
8-pin RJ-45 female.
10/100/1000 Base-T auto negotiating port. Con-
necting to this port will disable Wi-Fi settings.
F
RS-232
8-pin RJ-45 female.
Used to transmit and receive serial binary data
to and from serial controllable devices.
Ports 1-2 RS-232 - CTS/RTS handshaking. CTS
RTS handshaking availability is based on the
component profile.
See
RS-232 Wiring section for pin-outs.
G
IR
6-pin Screw Down Plug-in Connector. Used to
send IR signals to control devices with an IR
input or IR receiver via an IR flasher (5V toler-
ant only). See IR Wiring section for important
precautions regarding IR functionality before
making connections.
H
Relay
3-pin Screw Down Plug-in Connector. See Relay
Wiring section for pin-outs.
Normally Open (NO) / Normally Closed (NC) to
control devices requiring basic on/off operation.
DC Voltage Max: 30V DC 1A
I
GPIO
3-pin Screw Down Plug-in Connector. See GPIO
Wiring section for pin-outs.
GPIO Input - When configured as an input, the
processor will look for a low (<0.8V DC) or a
high (>2.4V DC) state.
Minimum 0V DC / Maximum 12V DC.
GPIO Output - When configured as an output,
the port provides a binary output of 0-12V DC
150mA max.
(1) Savant® Smart Host with Control 2 - (SHC-S2-00)
(1) 5V DC 3A Power Supply
with Quick Change AC Adapters (025-0153-xx)
(2) M3 x 6 mm Flathead Phillips Screw Black (039-0001-xx)
(2) 6-pin Screw Down Plug-in Connector Black (028-0664-xx)
(2) 3-pin Screw Down Plug-in Connector Black (028-0665-xx)
(1) Wall Mount Frame (074-0585-xx)
(1) Host Mount (074-0584-xx)
(1) Product and Regulatory Insert (009-1715-xx)
Box Contents
Specifications
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Cooling 10 CFM
Maximum BTU 51.5 BTU/hr
Power
Input Power 5V DC 3A
Maximum Power 15 watts
Standards
Wireless
Wi-Fi (802.11 b/g/n 2.4 GHz)
IMPORTANT! 802.11r (fast roaming) is not
supported
Security WPA™, WPA2™, WPA/wPA2™
Minimum Supported Release
Savant OS da Vinci 8.6
Regulatory
Safety and
Emissions
FCC Part 15 CE C-Tick ICES-003
FCC ID ASU-SHC2000
IC 10052A-SHC2000
RoHS Compliant
Dimensions and Weights
Height 1.58 in (4.0 cm)
Width 7.86 in (19.9 cm)
Depth 7.65 in (19.4 cm)
Weight
Net: 1.3 lb (.58 kg)
Shipping 2.1 lb (0.95 kg)
Rack Space 1U
NO NC C / /
G 1 PD
Ethernet RS232-1 RS232-2
- - 4 + +
5
- +
6
- 1
3
-
+ + 2
- +
Audio
Status 5VDC Reset
C A B D E G H F I
Savant® Smart Host with Control 2
Quick Reference Guide