background image

 

Installation Operation Maintenance

 

ESG-24 

ESG-15 

 MEDIUM DUTY 15" GRIDDLE

 

ESG-24 

 MEDIUM DUTY 24" GRIDDLE

 

ESG-36 

 MEDIUM DUTY 36" GRIDDLE

 

ESG-48 

 MEDIUM DUTY 48" GRIDDLE  

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE 

 

SATURN EQUIPMENT 

OWNER

S MANUAL 

Gas Griddle 

 Medium Duty 

Gas equipment manufactured for Saturn Equipment are for use with the type of gas specified on the rating plate 

and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition) 

FOR YOUR SAFETY

  

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

 

Instructions to be followed in the event the user smells gas fumes must be posted in a prominent location in the 

installed kitchen area. The information shall be obtained from a local gas supplier. 

WARNING:

 Improper installation, adjustment, alteration, service and maintenance can cause property damage, 

injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or 

 

servicing this equipment.

 

 

SATURN EQUIPMENT 

www.saturnequipment.com

 

Summary of Contents for ESG-15
















Reviews: