![background image](http://html1.mh-extra.com/html/sapirhome/sp-1230-cu/sp-1230-cu_instruction-manual_1198691001.webp)
_
English
_
Electric cordless rotating kettle
SP-1230-CU / CV
INSTRUCTION MANUAL
Important Safeguards
1.
Please read these operating instructions through carefully before connecting your
kettle to the power supply, in order to avoid damage due to incorrect use.
2.
Incorrect operation and improper handling can lead to faults on the appliance and
injuries to the user.
3.
The appliance is designed for household use only.
4.
Unplug the appliance from power supply when not in use.
5.
Keep the base unit away from damp and protect from splashes.
6.
Do not immerse the unit, cord or plug in water or other liquids. If this should occur,
remove the plug immediately and then have the unit checked by an expert before using
it again.
7.
Do not operate the appliance if the cord or plug shows signs of damage, if the
appliance has fallen on the floor or has been otherwise damaged. In such case take the
appliance to a specialist for checking and repair if necessary.
8.
Ensure that the cord does not hang over sharp edges and keep it away from hot
surfaces.
9.
Only pull it out of the power supply by the plug, not by the cord.
10.
Place the appliance on a stable surface, away from hot object (e.g. hotplates), naked
flames; do not place under curtains or low wall cupboards.
11.
You should never leave the appliance unattended during use.
12.
Children should never use electrical domestic appliance unsupervised.
13.
Use the kettle only with the base unit supplied, and do not use the base unit for any
other purposes.
14.
Never remove the kettle from its base unit while in operation. Switch the appliance off
first.
15.
Take care to close the lid properly before switching on. Otherwise, the appliance will
not switch off automatically and hot water may overflow.
16.
The kettle is for heating water only, and is not to be used for any other liquids.
Before Using For the First Time
1.
Remove all packing materials from the kettle.
2.
Before connecting of the kettle check that voltage indicated on the rating labels
corresponds the mains voltage in your home.
3.
Fill the kettle with cool water up to the”MAX” mark and boil it. Empty the kettle. The
appliance is ready for use.
Instruction for Use
Filter Placing
1.
Open the lid by pressing on the lid release button.
2.
Place the filter between the two grooves near the spout at the front of the kettle.
3.
Ensure that the filter is pressed down to the bottom of the grooves and fits correctly
then close the lid.
Note
: Never leave the filter loose in the kettle. Never remove the filter while the kettle
contains hot water.