San Telequip Private Limited.,
504 & 505 Deron Heights, Baner Road
Pune 411045, India
Phone : +91-20-27273455, 9764027070, 8390069393 Connecting. Converting. Leading!
email :
User Manual for Fiber to Serial Media Converter Rack
–SC09FSR
The Media Converter Rack is a 19 inch 2U Rack.
Maximum 14 Multimode, Single mode optical
transceivers can be installed in one Rack. The
Rack not only reduces the number of tie wires and
simplifies the structure, but also facilitates easy
management and maintenance.
Various Power Supplies with Single or Dual power supplies are available in the Rack.
Features
14 slots standard 19Inch 2U Rack.
Dual fans for cooling.
Well shielded power supply prevents electromagnetic radiations.
Installation
1. According to your needs, insert Media Cards in the slots.
2. Connect the Power cord.
3. Power On the switch on the back of the chassis. The power indicator lamp on the back plate will
glow.
4. Check the POWER
Led’s of the Media Converters. If Led glows then the power to the cards is
normal, otherwise check the power to the chassis.
Technical Specifications
1. Slots
:14 slots
2. Power supply
: AC100-265V,50-60HZ
RS-232/422/485 to Fiber Converter Cards
Features
Converts RS-232/422/485 signal to SM/MM Fiber
Extends RS-232/422/485 transmission distance: Up to 120 km with Single mode, Up to 2 km with
Multi mode
Supports baud rate up to 115.2 Kbps
Auto Baud Rate Detection
Specifications
Serial Communications
RS-232 Signals
: TX, RX, GND
4-wire RS-485 Signals
: TX+, TX-, RX+, RX-, GND
2-wire RS-485 Signals
: TX+, TX-, GND
Baud Rate
: 300 bps to 115.2 Kbps
Surge Protection
: 15 KV ESD
