background image

Installing driver over the network

151

2.  Using a Network-Connected Machine

 

On some UNIX OS, for example on Solaris 10, just added printers may not be 
enabled and/or may not accept jobs. In this case run the following two 
commands on the root terminal:

accept <printer_name>

enable <printer_name>

 

Uninstalling the printer driver package

 

The utility should be used to delete the printer installed in the system.

Run “

uninstallprinter

” command from the terminal.

It will open the 

Uninstall Printer Wizard

.

The installed printers are listed in the drop-down list.

Select the printer to be deleted.

Click 

Delete

 to delete the printer from the system.

Execute the “

. /install –d

” command to uninstall the whole package.

To verify removal results, execute the “

. /install –c

” command.

 

To re-install it, use the command “

. /install

” to reinstall the binaries.

Setting up the printer

To add the printer to your UNIX system, run ‘installprinter’ from the command 

line. This will bring up the Add Printer Wizard window. Setup the printer in this 

window according to the following steps:

1

Type the name of the printer.

Select the appropriate printer model from the model list.

Enter any description corresponding to the type of the printer in the 

Type

 field. This is optional.

Specify any printer description in the 

Description

 field. This is optional.

Specify the printer location in the 

Location

 field.

Type the IP address or DNS name of the printer in the 

Device

 textbox for 

network-connected printers. On IBM AIX with 

jetdirect

 

Queue type

only the DNS name is possible-numeric IP address is not allowed.

Queue type

 shows the connection as 

lpd

 or 

jetdirect

 in the 

corresponding list box. Additionally, 

usb

 type is available on Sun Solaris 

OS.

Select 

Copies

 to set the number of copies.

Check the 

Collate

 option to receive copies already sorted.

10 

Check the 

Reverse Order

 option to receive copies in the reverse order.

Summary of Contents for SCX-3405W





















































































































































































Reviews: