background image

 Figures and illustrations in this User Manual are provided for reference only and 

may differ from actual product appearance. Product design and specifi cations 

may be changed without notice.

 User  Instructions

 

 Screen Image retention

 Do not display a still image (such as on a video game) on the plasma display panel 

for more than several minutes as it can cause screen image retention. This image 

retention is also known as “screen burn”. To avoid such image retention, reduce the 

degree of brightness and contrast of the screen when displaying a still image.

 

 Heat on the top of the Plasma TV

 The top side of the product may be hot after long periods of use as heat dissipates 

from the panel through the vent hole in the upper part of the product.
 This is normal and does not indicate any defect or operation failure of the product.
 However, children should be prevented from touching the upper part of the product.

 

 

The product is making a “cracking” noise.

 A “cracking” noise may occur when the product contracts or expands due to a 

change in the surrounding environment such as temperature or humidity. This is 

normal and not a defect of the unit.

 

 Cell  Defects

 The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) 

pixels which require sophisticated technology to produce. However, there may be 

a few bright or dark pixels on the screen. These pixels will have no impact on the 

performance of the product.

 

 Avoid operating the TV at temperatures below 41°F (5°C)

 

 A still image displayed too long may cause permanent damage to the PDP 

Panel.

 

 Watching the Plasma TV in 4:3 format for a long period of time 

may leave traces of borders displayed on the left, right and 

centre of the screen caused by the difference of light emission 

on the screen. Playing a DVD or a game console may cause 

similar effects to the screen.
 Damages caused by the above effect are not covered by the 

Warranty.

 

 After-images on the Screen.

 Displaying still images from Video games for longer than a certain period of time may 

produce partial after-images.
 To prevent this effect, reduce the “brightness” and “contrast” when displaying still 

images for a long time.

 

 Warranty

 Warranty does not cover any damage caused by image retention.
 Burn-in is not covered by the warranty.

 

Contact SAMSU

NG WORL

D WIDE

If you have any questions or comments relating to Samsung products, 

please contact the SAMSUNG customer care centre.

Country

Customer Care Centre 

Web Site

AUSTRALIA

1300 362 603

www.samsung.com/au

NEW ZEALAND

0800 SAMSUNG (0800 726 786)

www.samsung.com/nz

CHINA

400-810-5858

www.samsung.com

HONG KONG

(852) 3698 4698

www.samsung.com/hk 

(Chinese)
www.samsung.com/hk_en 

(English)

INDIA

1800 3000 8282
1800 266 8282

www.samsung.com/in

INDONESIA

0800-112-8888 (Toll Free) 
(021) 56997777

www.samsung.com/id

JAPAN

0120-327-527

www.samsung.com

MALAYSIA

1800-88-9999

www.samsung.com/my

PHILIPPINES

1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline 

and Mobile]
02-4222111 [Other landline]

www.samsung.com/ph

SINGAPORE

1800-SAMSUNG(726-7864)

www.samsung.com/sg

THAILAND

0-2689-3232,
1800-29-3232

www.samsung.com/th

TAIWAN

0800-32-9999

www.samsung.com/tw

VIETNAM

1 800 588 889

www.samsung.com

GEORGIA

0-800-555-555

www.samsung.com

ARMENIA

0-800-05-555

www.samsung.com

AZERBAIJAN

088-55-55-555

www.samsung.com

UZBEKISTAN

8-10-800-500-55-500

www.samsung.com

KYRGYZSTAN

00-800-500-55-500

www.samsung.com

TADJIKISTAN

8-10-800-500-55-500

www.samsung.com

MONGOLIA

+7-800-555-55-55

www.samsung.com

BELARUS

810-800-500-55-500

www.samsung.com

MOLDOVA

0-800-614-40

www.samsung.com

ALGERIA

0800 100 100

www.samsung.com/n_

africa

PAKISTAN

0800-Samsung (72678) 

www.samsung.com/pk/

TUNISIA

80-1000-12

www.samsung.com/n_

africa

For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and 

may not be available in all regions.

 Plasma  TV

 user  manual

 © 2013 Samsung Electronics Co., Ltd. All rights reserved.

 

BN68-04871J

 BN68-04871J-01

 

 

 

 

 Important Safety Instructions

 

 

 

 

 

 Getting  Started

 

Accessories

 

 Remote Control & Batteries (AAA x 2)

 

 Owner’s  Instructions

 

 Warranty Card / Regulatory Guide (Not available in some locations)

 

 Power  Cord

 

 Input Cables (Sold Separately)

 

 Composite  (AV)

 

 Component

 

 Coaxial  (RF)

 

 HDMI

 

 TV Controller (Panel Key)

 The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.

 

 Remote control sensor

 TV  Controller

 The image is drawn by 

facing the front side of 

the TV.

 Function  menu

 

 

 

 

 m  R

 s

 

 P

 

 Return

 Selecting  the 

Media Play

 Selecting  a 

Source

 Selecting  the 

Menu

 

Power off

 

 

 Exits the menu when pressing the controller more than 1 second.

 

 When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you 

cannot operate it to move the up/down/left/right directions.

 

 Setup (Initial Setup)

 When you turn the TV on for the fi rst time, a sequence of on-screen prompts will assist in confi guring basic settings. Press the 

POWER

 button. Set the 

initial setup following instructions that the TV guides.

 

 Connecting the power cord and aerial. (refer to ‘Connections’)

 

 

 

 

 

 Connections

 

 For better picture and audio quality, connect to a digital device using an HDMI 

cable.

 

 The picture may not display normally (if at all) or the audio may not work if an 

external device that uses an older version of HDMI mode is connected to the TV. If 

such a problem occurs, ask the manufacturer of the external device about the HDMI 

version and, if out of date, request an upgrade.

 

 Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display 

or a connection error may occur.

 

 For set-top box connection using HDMI cable, we highly recommend you to 

connect the 

HDMI IN 1(STB)

 port.

 

 The TV model i

s not allowed for PC connection (distortion or incorrect picture 

displaying can 

appear).

 

 

 

 

 

 Changing the Input Source

 Source  List

 Use to select TV or other external input sources such as DVD / Blu-ray 

players / cable box / STB satellite receiver connected to the TV. 

 1. 

Press the 

SOURCE

 button.

 2. 

Select a desired external input source.

 

 TV / HDMI1 / HDMI2 / AV / Component

 You can only choose external devices that are connected to the TV. 

In the 

Source

, connected inputs are highlighted.

 How to use Edit Name

 

Edit Name

 lets you associate a device name to an input source. To 

access 

Edit Name

, press the 

TOOLS

 button in 

Source List

. Name the 

device connected to the input jacks to make your input source selection 

easier.

 Information

 You can see detailed information about the selected external device.

AUDIO OUT

AUDIO OUT

AUDIO OUT

L-AUDIO-R

VIDEO OUT

Y

R

Y

R

W

R

W

ANT OUT

AUDIO OUT

L-AUDIO-R

COMPONENT OUT

P

R

P

B

Y

R

B

R

G

R

B

RG

R

W

R

W

AUDIO IN

L-AUDIO-R

R

W

HDMI OUT

 or

 Power  Input

 TV Rear Panel

 TV Side Panel

 VHF/UHF  Aerial

 Cable

 USB

 HDMI  connection

 Set-top Box / Blu-ray players 

 Audio  connection 

 Amplifi er / Home Theater

 Component  connection

 Blu-ray player / DVD

 AV  connection

 VCR

 

 The side panel may differ 

depending on the model.

 

 The PDP device may interfere with an amateur radio or AM radio.

 

 When using two-way radio mobile and portable units or amateur 

radio or AM radio near by your TV, this may cause the TV to 

malfunction.

 

 

 

 

 

 Remote  Control

 

 

 This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

 Alternately select Teletext ON, Double, Mix or OFF. 

 Returns to the previous channel. 

 Press to directly access to channels.

 Turns the TV on and off.

 Use these buttons in a specifi c feature.

 

P.MODE

: Selects the picture mode. 

 

P.SIZE

: Selects the picture size. 

   : 

Sports Mode

 on or off.

 Cuts off the sound temporarily.

 Selects the HDMI mode directly.

 Displays the channel list on the screen. 

 Displays information on the TV screen. 

 Quickly select frequently used functions. 

 Selects the on-screen menu items and changes the 

values seen on the menu.

 Exit the menu.

 Returns to the previous menu.

 Displays and selects the available video 

sources. 

 Use these buttons according to the direction 

on screen.

 Changes  channels.

 Displays the main on-screen menu.

 Views  the 

Media Play

.

 Adjusts the volume.

A

B

C

D

HDMI

P.SIZE

P.MODE

SPORTS

 Installing batteries (Battery size: AAA)

 

 

 NOTE

• 

 Use the remote control within 23 feet from TV.

• 

 Bright light may affect the performance of the remote control. Avoid using nearby special fl uorescent light or neon signs.

• 

 The Colour and shape may vary depending on the model.

 

 

 

 

 

 Broadcasting  Menu

 

 Memorizing  channels

 Auto  Tuning

 (depending on the country)

 

 Automatically allocated programme numbers may not correspond to 

actual or desired programme numbers. If a channel is locked, the PIN 

input window appears.

 

 Using the Channel menu

 Channel  List

 The 

Channel List

 contains the channels your TV displays when you press 

the channel button. You can view channel information, 

All

 or 

Favourites 

1-5

. Press 

(

Mode

) button to change the channel mode.

 

 When you press the 

CH LIST

 button on the remote control, 

Channel 

List

 screen will be displayed at once.

 Channel  Mode

 

 Edit  Favourites

: Set channels you watch frequently as favourites.

 

 For detailed information about using 

Edit Favourites

, refer to “

Edit 

Favourites

”.

 

 Favourites  1-5

: Shows all favourite channels, arranged in up to fi ve 

groups. Each group has a separate screen.

 

 The TV displays 

Favourites 1-5

 only if you have added favourites 

using 

Edit Favourites

.

 

 All

: Shows all currently available channels.

 Schedule  Manager

 You can set a desired channel to be displayed automatically at the 

intended time. In addition, you can view, modify or delete a channel you 

have reserved to watch.

 

 You must set the current time first using the 

Time

 

 

Clock Set

 

function in the 

System

 menu to use this function.

 1. 

Press the 

Schedule

 on the 

Schedule Manager

 screen. The 

Schedule 

Viewing

 menu appears.

 2. 

Press the 

/

/

/

 buttons to set each option menu.

 

 Channel

: Select the desired channel.

 

 Repeat

: Select 

Once

Manual

Sat~Sun

Mon~Fri

 or 

Everyday

 to 

set at your convenience. If you select 

Manual

, you can set the day you 

want.

 

 The  (

c

) mark indicates the day you’ve selected.

 

 Date

: You can set the desired date.

 

 It is available when you select 

Once

 in 

Repeat

.

 

 Start  Time

: You can set the start time you want.

 

 If you want to edit or cancel a reserved schedule, select the reserved 

schedule on 

Schedule Manager

. Then press the 

ENTER

E

 button 

and select the 

Edit

 or 

Delete

.

 

 Edit  Channel

 You can edit or delete channels.

 1.   

Go to 

Edit Channel

 screen.

 2.   

Press the 

▲/▼

 buttons to select the desired channel, then press 

the 

ENTER

E

 button. The (

c

) mark indicates the channel you’ve 

selected.

 

 You can select more than one channel.

 

 Press  the 

ENTER

E

 again to deselect the channel.

  Using the coloured and function buttons with the Edit Channel  

 

 a

 Red (Change Number)

: Changes channel order on the channel list.

 

 E

 (Done)

: Completes changing the channel order.

 

 b

 Green (Lock / Unlock)

: Lock a channel so that the channel cannot 

be selected and viewed. / Unlock the channel that you locked.

 

 This function is available only when the 

Channel Lock

 is set to 

On

.

 

 The PIN input screen appears. Enter your 4-digit PIN. Change the PIN 

using the 

Change PIN

 option.

 

 { 

Yellow (Delete)

: Deletes a channel from the channel list.

 

 }

 Blue (Select All / Deselect All)

: Selects or deselects all channels 

at once.

 

 

 (Go To)

: Goes to channel directly by pressing numbers (0~9).

 

 k

 (Page)

: Move to previous or next page.

 

 T

 (Tools)

: Displays the option menu. The option menu items that 

appear may differ depending on the channel status and type.

 

 Category

: Changes the channel mode to 

All, Recently Viewed, 

Most Viewed.

 The selected channel mode is displayed.

 

 Edit  Favourites

: Go to 

Edit Favourites

 screen directly.

 

 Rename  channel

: Assign a name of up to fi ve characters to a 

channel. For example, Food, Golf, etc. This makes it easier to fi nd and 

select the channel.

 

 Channel  Info

: Display details of the selected channel.

 

 Information

: Display details of the selected programme.

 Edit  Favourites 

t

 You can add, edit or delete favourite channels.

 1.   

Go to 

Edit Favourites

 screen.

 2.   

Press the 

▲/▼

 buttons to select the desired channel, and then press 

ENTER

E

 button.

 3.   

Choose a specifi c favourite list among 

Favourites 1-5

 using 

b

 

(

Change Fav.

) button, and then press the 

{

 (

Add

) button. The 

selected channel has been added in 

Favourites 1-5

.

 

 One favourite channel can be added in several of favourites among 

Favourites 1-5

.

   Using the coloured and function buttons with the Edit Favourites  

 

 a

 Red (Category / Change order)

 

 Category

: Changes the channel mode to 

All, Recently Viewed

Most Viewed

. The selected channel mode is displayed.

 

 Change  order

: Changes the favourite channel order.

 

E

 (

Done

): Completes changing the channel order.

 

 b

 Green (Change Fav.)

: Changes favourite list among 

Favourites 1-5

.

 

 {

 Yellow (Add / Delete)

 

 Add

: Adds selected channels to 

Favourites 1-5

.

 

 Delete

: Deletes the favourite channel from 

Favourites 1-5

.

 

 }

 Blue (Select All / Deselect All) 

: Selects or deselects all channels 

at once.

 

 

 (Go To)

: Goes to channel directly by pressing numbers (0~9).

 

 k

 (Page)

: Move to previous or next page.

 

 T

 (Tools)

: Displays the option menu. The option menu items that 

appear may differ depending on the channel status and type.

 

 Copy to favourites

: Copy the selected favourite channel in 

Favourites 1-5

. You can add from other favourite list.

 

 Rename  Favourites

: Assign your own favourite channel name.

 

 Edit  Channel

: Go to 

Edit Channel

 screen directly.

 

 Information

: Display details of the selected programme.

 

 Other  Features

 Channel  Settings

 

 Area

 (depending on the country)
 You can change the desired area.

 

 Manual  Tuning

 Scans for a channel manually and stores in the TV.

 

 If a channel is locked, the PIN input window appears.

 

 According to the channel source, 

Manual Tuning

 may be supported.

 1.   

Press the 

New

 button.

 2.   

Set the 

Programme, Colour System, Sound System, Channel

 and 

Search

.

 3.   

Press the 

Store

 button. When scanning has fi nished, a channel is 

updated in the channel list.

 

 Channel  mode

 

 P

 (programme mode): When tuning is complete, the broadcasting 

stations in your area have been assigned to the position numbers 

from P0 to P99. You can select a channel by entering the position 

number in this mode.

 

 C

 (aerial channel mode) / 

S

 or 

Z

 (cable channel mode) (depending 

on the country): These two modes allow you to select a channel 

by entering the assigned number for each aerial broadcasting 

station or cable channel.

 

 Fine  Tune

 If the signal is weak or distorted, fi ne tune the channel manually.

 

 Fine tuned channels are marked with an asterisk “*”.

 

 To reset the fine-tuning, select 

Reset

.

 

 Transfer Channel List

 (depending on the country)
 Imports or exports the channel map. You should connect a USB storage to 

use this function.

 

 The PIN number input screen appears. Enter your 4 digit PIN number.

 

 Supported file systems are FAT and exFAT.

 Channel  Lock

 Lock channels in Channel menu to prevent unauthorized users, such as 

children, from watching unsuitable programme.

 

 Available only when the 

Source

 is set to 

TV

.

 

 

 

 

 

 Picture  Menu

 

 Changing the Preset Picture Mode

 Picture  Mode 

t

 Select your preferred picture type.

 

 Dynamic

: Suitable for a bright room.

 

 Standard

: Suitable for a normal environment.

 

 Movie

: Suitable for watching movies in a dark room.

 

 Adjusting Picture Settings

 Cell Light / Contrast / Brightness / Sharpness / 

Colour / Tint (G/R)

 Your television has several setting options for picture quality control.

 

 In  analogue 

TV, AV

 modes of the PAL system, the 

Tint (G/R)

 function 

is not available.

 

 Settings can be adjusted and stored for each external device 

connected to the TV.

 

 Lowering picture brightness reduces power consumption.

 Picture  Size

 Set the various picture options such as picture size and aspect ratio.

 

 The available items may differ depending on the selected mode.

 

 Depending on the input source, the picture size options may vary.

 

 Picture  Size 

t

: Your cable box/satellite receiver may have its 

own set of screen sizes as well. However, we highly recommend you 

use 16:9 mode most of the time.

 

 16:9

: Sets the picture to 16:9 wide mode.

 

 Wide  Zoom

: Magnifi es the picture size more than 4:3.

 

 Adjusts  the 

Position

 by using 

 buttons.

 

 Zoom

: Magnifi es the 16:9 wide pictures vertically to fi t the screen size.

 

 Adjusts  the 

Zoom

 or 

Position

 by using 

 button.

 

 4:3

: Sets the picture to basic (4:3) mode.

 

 Do not watch in 4:3 format for a long time. Traces of borders 

displayed on the left, right and centre of the screen may cause 

image retention (screen burn) which are not covered by the 

warranty.

 

 Screen  Fit

: Displays the full image without any cut-off when HDMI 

(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are 

inputted.

 

 Zoom/Position

: Adjust the picture size and position. It is only available 

in 

Zoom

.

 

 Position

: Adjust the picture position. It is only available in 

Screen Fit

 or 

Wide Zoom

.

 

 The available items may differ depending on the selected mode.

 

 Settings can be adjusted and stored for each external device 

connected to an input on the TV.

 

 If you use the 

Screen Fit

 function with HDMI 720p input, 1 line will be 

cut at the top, bottom, left and right as in the overscan function.

 Input  Source

 Picture  Size

 ATV/AV

 16:9, Wide Zoom, Zoom, 4:3

 Component(480i, 480p, 576i, 

576p, 720p)

 16:9, Wide Zoom, Zoom, 4:3

 Component(1080i,  1080p)

 16:9, Wide Zoom, Zoom, 4:3, Screen Fit

 HDMI(720p, 1080i, 1080p)

 16:9, Wide Zoom, Zoom, 4:3, Screen Fit

 PIP

 You can watch the TV tuner and one external video source 

simultaneously. 

PIP

 (Picture-in-Picture) does not function in the same 

mode.

 

 If you turn the TV off while watching in PIP mode, the PIP window 

will disappear.

 

 You may notice that the picture in the PIP window becomes slightly 

unnatural when you use the main screen to view a game or karaoke.

   PIP Settings  

 Main  picture

 Sub  picture

 Component,  HDMI

TV / AV

 

 PIP

: Activate or deactivate the PIP function.

 

 Source

: Select the source for the sub-screen.

 

 Channel

: Select the channel for the sub-screen.

 

 Size

: Select a size for the sub-picture.

 

 Position

: Select a position for the sub-picture.

 

 Sound  Select

: You can choose the desired sound (

Main

 / 

Sub

) in 

PIP

 mode.

 

 Changing the Picture Options

 Advanced  Settings

 (available  in 

Standard / Movie

 mode)

 You can adjust the detailed setting for the screen including colour and 

contrast.

 

 Dynamic  Contrast

: Adjust the screen contrast.

 

 Black  Tone

: Select the black level to adjust the screen depth.

 

 Flesh  Tone

: Adjust the fl esh tone colour.

 

 RGB Only Mode

: Displays the Red, Green and Blue colour for 

making fi ne adjustments to the hue and saturation.

 

 Colour  Space

: Adjust the range of colours available to create the 

image.

 

 White  Balance

: Adjust the colour temperature for a more natural 

picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, 

green, blue) darkness.

 R-Offset / G-Offset / B-Offset

: Adjust each colour’s (red, green, 

blue) brightness.

 R-Gain / G-Gain / B-Gain

: Adjust each colour’s (red, green, blue) 

brightness.

 Reset

: Resets the 

White Balance

 to its default settings.

 

 Gamma

: Adjust the primary colour intensity.

 

 Motion  Lighting

: Reduce power consumption by brightness control 

adapted motion.

 

 Only available in 

Standard

 mode.

 

 When changing a setting value of 

Cell Light

Brightness

 or 

Contrast

Motion Lighting

 will be set to 

Off

.

 Picture  Options

 

 Colour  Tone

 

 Warm1

 or 

Warm2

 will be deactivated when the picture mode is 

Dynamic

.

 

 Settings can be adjusted and stored for each external device 

connected to an input on the TV.

 

 Digital Clean View

: If the broadcast signal received by your TV is 

weak, you can activate the 

Digital Clean View

 feature to reduce any 

static and ghosting that may appear on the screen.

 

 When the signal is weak, try other options until the best picture 

is displayed.

 Auto  Visualisation

: When changing analogue channels, displays 

signal strength.

 

 Only available for analogue channels.

 

 When  the 

INFO

 button is pressed, the signal strength bar is 

displayed.

 

 When bar is green, you are receiving the best possible signal.

 

 MPEG Noise Filter

: Reduces MPEG noise to provide improved 

picture quality.

 

 HDMI Black Level

: Selects the black level on the screen to adjust the 

screen depth.

 

 Film  Mode

: Sets the TV to automatically sense and process fi lm 

signals from all sources and adjust the picture for optimum quality.

 

 Available in TV mode and external input mode which supports SD 

(480i / 576i) and HD (1080i).

 

 If the screen does not seem natural, change its option to 

Off

 / 

Auto1

 / 

Auto2

 in 

Film Mode

.

 

 Analog Clean View

: Reduces diagonal noise in picture caused by the 

crosstalk of signals.

 Picture  Off

 The screen is turned off but the sound remains on. Press any button 

except volume button to turn on the screen.

 Reset  Picture

 Resets your current picture mode to its default settings.
 
 

 

 

 

 

 Sound  Menu

 

 

 Changing the Preset Sound Mode

 Sound  Mode

 

 Standard

: Selects the normal sound mode.

 

 Music

: Emphasizes music over voices.

 

 Movie

: Provides the best sound for movies.

 

 Clear  Voice

: Emphasizes voices over other sounds.

 

 Amplify

: Increase the intensity of high-frequency sound to allow a 

better listening experience for the hearing impaired.

 PS43F4000
PS51F4000

 PS43F4100

 For India Only

 

 This marking on the product, accessories or literature indicates 

that the product and its electronic accessories should not be 

disposed of with other household waste at the end of their 

working life. To prevent possible harm to the environment 

or human health from uncontrolled waste disposal, please 

separate these items from other types of waste and recycle 

them responsibly to promote the sustainable reuse of material 

resources.

 For more information on safe disposal and recycling visit our website 

www.samsung.com/in or contact our Helpline numbers - 18002668282, 

180030008282.

- English -

•  The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, 

and to protect it from overheating, these slots and openings must never be blocked or covered.

- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

•  Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
•  Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire  or electric shock.
•  Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a 

swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. 

•  Make sure to pull out the power cord from the outlet before cleaning.
•  This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the 

environment. Please contact your local authorities for disposal or recycling information.

•  Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
•  Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular 

attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.

•  To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and 

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

•  Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local 

electrical supply. (depending on the model)

•  Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
•  To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
•  Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not 

touch the power cord with wet hands.

•  If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact 

an authorized dealer or service center.

•  Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially 

when children, elderly or disabled people will be left alone in the house).  

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause the 
insulation to deteriorate.

•  Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, 

chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage 
to your set.

•  Use only a properly grounded plug and receptacle. 

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•  To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible 

at all times.

•  Do not allow children to hang onto the product.
•  Store the accessories (batteries, etc.) in a location safely out of the reach of children.
•  Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
•  Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
•  To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such 

as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the 
product. 

•  Do not expose the apparatus to dripping or splashing. 
•  Do not dispose of batteries in a fire. 
•  Do not short circuit, disassemble, or overheat the batteries.
•  not short circuit, disassemble, or overheat the batteries.
•  There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
•  WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

  Warning! Important Safety Instructions

(Please read the safety instructions below before installing and using the product.)

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE

-

FER ALL SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK. DO NOT OPEN

This symbol indicates that high voltage is present inside. It 

is dangerous to make any kind of contact with any internal 

part of this product.

This symbol indicates that important literature concerning 

operation and maintenance has been included with this 

product.

 - 2 -

 - 1 -

 - 6 -

 - 5 -

 - 3 -

 - 7 -

 - 4 -

 - 8 -

[PF4000-AR]BN68-04871J-01ENG.indd   1

2013-08-16     11:08:44

Reviews: